Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
The RESET function returns your audio adjustments to the following factory settings: Bass ................. center (25) Treble ............... center (25) Balance .............. center (0) 35 TV operation TV operation Selecting the audio languages/ Selecting the digital output / / / EXIT/CANCEL MENU To select the digital output To select the audio languages When two or more audio languages are included in a digital Use this feature to select the digital audio output format when signal, you can select one of the audio language. you connect a Dolby Digital decoder or other digital audio system to the coaxial digital audio output on the TV. 1 Press MENU in the TV mode, then press or to display the “AUDIO” menu. 3 Press or to select your desired language. 1 Press MENU in the TV mode, then press or to display the “AUDIO” menu. 2 3 4 Press or to select “DIGITAL OUTPUT”. Press or to select “PCM” or “DOLBY DIGITAL”. Press EXIT/CANCEL to clear the menu screen. 2 Press or to select “AUDIO LANGUAGE”, then press . 4 Press EXIT/CANCEL to clear the menu screen. Note: Notes: Audio language feature is not available for analog channel. • Digital output feature is available for only digital channel. • Digital audio output is effective for only digital source (digital channel or DVD playback). 36 Checking the signal meter/ Using the auto shut off feature / / / EXIT/CANCEL MENU To use the auto shut off feature To check the signal meter You can check the strength of the digital signal by viewing the In case of “AUTO SHUT OFF” is “ON”, if a station being digital signal meter. viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes. TV operation1 2 3 4Press MENU in the TV mode, then press or to display the “SETUP” menu. Press or to highlight “SIGNAL METER”. Press or to check the digital signal strength. Press EXIT/CANCEL to return to the normal screen. 1 2 3 4 Press MENU in the TV mode, then press or to display the “SETUP” menu. Press or to highlight “AUTO SHUT OFF”. Press or to highlight “ON”. Press EXIT/CANCEL to return to the normal screen. Notes: • Signal meter feature is not available for analog channels. • After approximately 4 minutes, SIGNAL METER screen will return to normal TV-opreation automatically. • When you select a vacant channel, the signal meter may react. 37 38 Basic playback Press STOP to end playback. ¦ Resuming facility • The unit records the stopped point, depending on the disc. “ ” appears on the screen. Press PLAY to resume playback (from the scene point). • If you press STOP again (“¦” appears on the TV screen.), the unit will clear the stopped point. On the TV screen, “ ” changes to “Reading” and then playback commences. DVD VCD CD Preparations: • When connecting to other equipment, turn the power off. 1 Press POWER on the unit or on the remote control to turn on the unit. The Power indicator on the front of the main unit will light. • Every time you press POWER, the TV/DVD starts from TV mode. • When using an amplifi er, switch on the amplifi er. 4 2 Press TV/DVD on the remote control to select DVD mode. The DVD startup screen will appear on the TV screen. 3 Load a disc in the disc slot. Basic playback Load the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position. A menu screen will appear on the TV screen if the disc has a menu feature. Press / or / on the remote control to select title, then press ENTER. Title is selected and play commences. 6 ¦ To start playback in the stop mode Press PLAY. Note: If the unit does not operate properly: Static electricity, etc., may affect the TV/DVD’s operation. In such case, disconnect the AC cord, then connect it again. Playing a disc This section shows you the basics on how to play a disc. CAUTION Keep your fi ngers well clear of the disc slot when disc is loading or unloading. Neglecting to do so may cause serious personal injury. Press VOLUME + or – to adjust the volume. 5 Reading EJECT POWER PLAY STOP VOLUME +/– ENTER PLAY STOP TV/DVD / / / POWER VOL +/– Book 5Z0-01.indb 38 9/11/2549 16:15:15 Basic playback To pause playback (still mode) Press PAUSE during playback. To resume normal playback, press PLAY. • The sound is muted during still mode. To stop playback Press STOP. To remove the disc Press EJECT. Remove the disc after the disc comes out. To obtain a higher quality picture Occasionally, some picture noise may appear on the TV screen while playing a DVD video disc because the high resolution pictures on these discs include a lot of information. In such case, you may reduce the SHARPNESS with the Picture control adjustment menu (see page 33). About DVD VCD CD The DVD VCD CD icons on the heading bar show the playable discs for the function described under that heading. : You can use this function with DVD video discs. VCD : You can use this function with Video CDs. CD : You can use this functi...
Este manual também é adequado para os modelos :TV - 15DLV77B (5.45 mb)
TV - 15DLV77 (5.45 mb)
TV - 15DLV77B (5.45 mb)