Assessments - 2, GPA: 3
(
)
)
|
Facilidade de uso
3 With an amplifier not equipped with Dolby Digital Connect the equipment as follows. • This connection is only suitable for Video CDs and Audio CDs. 75 W coaxial cable (not supplied) Amplifier equipped with Dolby Surround Pro Logic * Connect one or two rear speak- ers. The output sound from the rear speakers will be monaural even if you connect two rear speakers. Connecting to an amplifier equipped with a DTS decoder To COAXIAL type digital audio input * Digital Theater Systems (DTS) DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs. If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. Amplifier equipped with a DTS decoder To COAXIAL type digital audio input 75 W coaxial cable (not supplied) 16 5M40101A [E] (P13-23) 16 20/4/04, 16:39 Connecting to an amplifier equipped with a MPEG audio decoder MPEG2 sound You can enjoy motion picture and live concert DVD video discs with dynamic realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor. Connections Connecting to an amplifier equipped with a digital audio input 2 channel digital stereo You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers). Notes: Amplifier equipped with an MPEG2 audio decoder To COAXIAL type digital audio input 75 W coaxial cable (not supplied) Amplifier equipped with a Digital audio input To COAXIAL type digital audio input 75 W coaxial cable (not supplied) • DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD. • Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the “COAXIAL” input of a Receiver or Processor. • Refer to the owner’s manual of the connected equipment as well. • When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound. • Turn off the amplifier before you connect or disconnect the TV/DVD’s power cord. If you leave the amplifier power on, the speakers may be damaged. 17 5M40101A [E] (P13-23) 17 20/4/04, 16:39 Basic setup Basic setup POWER Starting setup The STARTING SETUP function makes installing your TV/DVD easily. It leads you the Language selection, TV/CABLE selection and auto channel memory automatically. CANCEL IMPORTANT: Make sure that the antenna or cable TV system connection / is made! ENTER Starting setup Press or to select “TV” or “CABLE”, then press ENTER. Press or to select “START”, then press ENTER. If you select “CANCEL” and press ENTER, the STARTING SETUP stops and changes to the TV screen. 1 2 3 Now the “AUTO CH MEMORY” starts. After the starting setup is completed, the TV channel appears on the screen. Note: If you press the CANCEL button in the process of “AUTO CH MEMORY” you can do starting set up function again. 4 Note: The starting setup function will work only when you press the POWER button for the first time. Press POWER. The starting setup function begins and the Language setup menu appears on the screen. Press or to select your desired language, then press ENTER. ENTER POWER CH + CH – ENTER CH + CH – LANGUAGE/IDIOMA/LANGUE ENGLISH ESPANOL FRANCAIS / / ENTER>< CHANNEL PLAN TV CABLE / / ENTER>< ENTER CH + CH – / / ENTER>< AUTO SETUP START CANCEL AUTO CH MEMORY STOP : CANCEL 18 5M40101A [E] (P13-23) 18 20/4/04, 16:39 Setting the language This TV/DVD can display the on screen language in English, Spanish or French. Select the language you prefer first, then proceed with the other menu MENU options. / / / ENTER Press or to select the desired language: English (ENGLISH), Spanish (ESPANOL) or French (FRANCAIS), then press ENTER.2 Press MENU, then press or to select option. 1 Press MENU repeatedly until the menu screen is cleared.3 SETUP/MENU VOL – VOL + ENTER CH + CH – SETUP/MENU Setting the language LANGUAGE/IDIOMA/LANGUE ENGLISH ESPANOL FRANCAIS / / ENTER/MENU LANGUAGE/IDIOMA/LANGUE ENGLISH ESPANOL FRANCAIS /MENU Notes: • If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the player's operation. Disconnect the AC power cord once, then connect it again. • The TV section has its own menu and also DVD section has its own menu 40 . Basic setup 19 5M40101A [E] (P13-23) 19 20/4/04, 16:39 TV operation TV operation TV ope...
Este manual também é adequado para os modelos :TV - MD24FP1 (1.63 mb)