Assessments - , GPA: ( )

Instruções de Operação Toshiba, Modelo 19A25

Fabricante : Toshiba
Arquivo Tamanho: 763.2 kb
Arquivo Nome :

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

6. MENU Button -Press to display the on-screen menu function. 7. SET + / – Buttons - Press to select the desired setting during on-screen operations. 8. RESET Button -Press to reset the on-screen picture adjustments to their factory preset positions. 9. TV/VIDEO Button -Switches between the TV and external device inputs. 10. RECALL Button -When you press this button, the channel number will appear in the upper right corner of the screen. Press the button again to remove it from the screen. 11. MUTE Button -To turn off the sound, press this button once. The TV will be silenced and the word “MUTE” will appear on the screen. The muting feature can be released by pressing the MUTE button again or one of the VOL + or – buttons. 12. CH (CHANNEL) + / – Buttons -Press the CH + button to change to a higher numbered channel set into memory. Press the CH – button to change to a lower numbered channel set into memory. 13. ENTER Button -Press to enter or select information for on-screen operations. 14. 1/2 Button -Switches between captions channel 1 and captions channel 2 in the closed caption mode. 15. CAP/TEXT Button -Press to switch between normal TV and the two closed caption modes (captions or text), when available. Before using the remote control, batteries must first be installed. HOW TO INSTALL BATTERIES 1. Open the battery compartment cover. 2. Install two “AAA” (penlight size) batteries. 3. Replace the battery compartment cover. 6 Use two “AAA” size penlight batteries (supplied) for the remote control. The batteries may last approximately one year depending on how much the remote control is used. For best performance, it is recommended that you replace the batteries on a yearly basis or when the remote operation becomes erratic. Caution: • Never throw batteries into a fire. Note : • Be sure to use AAA size batteries. • Dispose of batteries in a designated disposal area. • Attention should be drawn to the environmental aspects of battery disposal. • Do not mix different battery types or combine used batteries with new ones. • If the remote control does not operate correctly, or if the operating range becomes reduced, replace both batteries with new ones. • If the batteries are dead or if you will not be using the remote control for a long time, remove the batteries to prevent battery acid from leaking into the battery compartment. J3M21921A(E)_P02-07 6 14/12/2004, 5:01 PM ANTENNA/CABLE TV CONNECTIONS Choose one of the following seven connections, based on your equipment and service: Combination VHF/UHF antenna Single 75 ohm cable (or) Single 300 ohm twin-lead wire* TRANSFORMER (not supplied) *For best performance, if you have a splitter connected, remove the splitter and connect the single wire to the transformer, and then to the TV’s antenna input (as illustrated here). To ANT inputon back of TV To ANT inputon back of TV Separate VHF and UHF antennas or Combination VH...