Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Model number: ________________________ Serial number: ________________________ Caution: The plug has one prong wider than the other and will fit only one way into a standard electrical outlet (120 volt AC, 60 Hz). If the plug does not fit into the outlet, try turning it around. If the plug still does not fit, the outlet is probably non-standard and must be replaced by a qualified electrician. Do not tamper with the plug or try to force it into a non-standard outlet. wide prong 1 Reference Connectingyour TV Connecting your TV If you haven’t connected electronic equipment before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied.) • A coaxial cable is the standard cable that comes in from your antenna or cable converter box. Coaxial cables use “F” connectors. • Audio and video cables are usually color coded according to use: yellow for video and red and white for audio. The red audio cable is for the stereo right channel, and the white audio cable is for the stereo (or mono) left channel. If you look at the rear panel of the TV, you will see that the terminals are color coded in the same manner as the cables. • S-video cables provide better picture performance. S-video cables can only be used with S-video compatible components. • ColorStreamTM cables come in sets of three and provide the best picture performance. ColorStream cables can only be used with ColorStream compatible components. S-Video ANTENNA Cable Coaxial Cable ColorStream AUDIO Cable Cable VIDEO Cable Connecting a VCR This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and to record from one channel while watching another channel. You will need: • one coaxial cable • one pair of audio cables (only one cable for a mono VCR) • one video cable Cable Lead-in from Cable Box or Antenna TV Stereo VCR VIDEO AUDIO OUT IN from ANT CH 3 CH 4 OUT to TV L R IN ANT-1 OUT ANT (75.) ANT-2 INOUTDVD IN VIDEOCOLOR STREAM INPUT VIDEO 2 VIDEO 1 MONO L/MONO S VIDEO L R AUDIO L R AUDIO R AUDIO Y Cb Cr VIDEO Caution: Do not plug the TV in until you have finished connecting all of your equipment. Caution: If using a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a S-VHS VCR, use the S-video connections and remove the video cable. Do not connect the video cable and the S-video cable to Video-1 simultaneously. 2 Connecting a cable converter box This connection allows you to watch cable and premium channels. You should keep your TV selected to ANT-1 so that you can use the TV features. When viewing premium channels, select ANT-2 and tune the TV to channel 3 or 4 (whichever channel is vacant in your area), then use the converter box to change channels. You will need two coaxial cables. ANT-1 OUT ANT (75.) ANT-2 INOUTDVD IN VIDEOCOLOR STREAM INPUT VIDEO 2 VIDEO 1 MONO L/MONO VIDEO S VIDEO L R AUDIO L R AUDIO R AUDIO Y Cb Cr From Cable cable converter box IN OUT Connecting a cable converter box and a VCR This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes. Change the TV to video mode. Tune the VCR to channel 3 or 4 (the same channel as the cable box output switch). Use the cable convertor box to change channels. The PIP source should be set to TV mode. (see page 24) You will need: • three coaxial cables • one pair of audio cables (only one cable for a mono VCR) • one video cable • cable splitter From Cable TV Stereo VCR ANT-1 OUT ANT (75.) ANT-2 INOUTDVD IN VIDEOCOLOR STREAM INPUT VIDEO 2 VIDEO 1 MONO L/MONO S VIDEO L R AUDIO L R AUDIO R AUDIO Y Cb Cr VIDEO AUDIO OUT IN from ANT CH 3 CH 4 OUT to TV L R IN VIDEO cable converter box IN OUT cable splitter IN OUT OUT 3 Caution: If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have a S-VHS VCR, use the S-video connections and remove the video cable. Do not connect the video cable and the S-video cable to Video-1 simultaneously. Welcome toToshiba Connectingyour TV Using theRemote Control Setting upyour TV Using the TV’s Features AppendixIndex Reference Connectingyour TV Connecting a DVD/satellite receiver and a VCR This connection allows you to watch DVD/satellite, video and TV programs. You can record from the DVD/satellite receiver and TV, as well as record one TV channel while watching another channel. You will need: • one coaxial cable • three pairs of audio cables (only one cable for a mono VCR) • two video cables • one S-video cable Stereo VCR VIDEO AUDIO OUT IN from ANT CH 3 CH 4 OUT to TV L R IN ANT-1 OUT ANT (75.) ANT-2 INOUTDVD IN VIDEOCOLOR STREAM INPUT VIDEO 2 VIDEO 1 MONO L/MONO S VIDEO L R AUDIO L R AUDIO R AUDIO Y Cb Cr TV DVD / Satellite Receiver AUDIO OUT VIDEO OUT S VIDEO L R To Satellite Satellite IN To Antenna VIDEO Caution: You can use a video cable instead of the S-video cable, but the picture quality will decrease. If you use a S-video cable between the TV and DVD/s...
Este manual também é adequado para os modelos :TV - 36A11 (1 mb)