Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Getting 3 Fix the TV to the Table-Top Stand according to the arrow marks that guide the screw holes using the supplied screws. (Continued) 7 GB For KDL-60EX720 For KDL-60EX720 Neck 2 Attach the TV and Table-Top Stand with the supplied screw and hexagon wrench. * Head * 3 N·m {30 kgf·cm} Detaching the Table-Top Stand from the TV To detach the Table-Top Stand from the TV, remove the screws fixed in step 3. For KDL-60EX720, be sure to remove the screws for detaching the head when the Table-Top Stand is not attached to the TV. ~ • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV. • When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV. • To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface. 2: Adjusting the viewing angle of the TV This TV can be adjusted within the angles as illustrated. Angle adjustment (Swivel) (except KDL-60EX720/ KDL-26/22EX42x) ~ • When adjusting the angle, hold the stand with one hand to avoid having the stand slip or TV tip over. B Except KDL-32EX420 (Australia and New Zealand model) 20° 20° 20° 20° B KDL-32EX420 (Australia and New Zealand ~ • Set the torque setting to approximately 3 N·m {30 model) kgf·cm}. 15° 15° 15° 15° 8 GB Angle adjustment (Tilt) B KDL-32EX420 (Australia and New Zealand model) (except KDL-60EX720/ KDL-46/40/32CX523/ KDL-46/40/32CX520) 0° ~ • Be careful not to pinch your fingers between the TV and stand when adjusting the angle. B KDL-55/46/40/32EX723, KDL-55/46/40/32EX720, KDL-46/40/32EX523, KDL-46/40/32EX520 and KDL-32EX420 (except Australia and New Zealand model) 0° - 6° Getting 6° B KDL-26/22EX423 and KDL-26/22EX420 0° - 6° 3D Sync Transmitter (KDL-55/46/40/32EX72x only) • Do not expose the Presence Sensor to direct sunlight or other strong light, as malfunction may occur. ~ • Ensure that there are no objects in front of the TV. IR Sensor Presence Sensor 9 GB Connecting an antenna/cable and VCR Connecting an antenna/cable and VCR Connecting an antenna/ cable/VCR Connecting an antenna/cable Antenna cable (not supplied) Connecting a Set Top Box/recorder (e.g. DVD recorder) with HDMI Antenna cable (not supplied) Antenna cable (not supplied) AV cable (not supplied) VCR Set Top Box/recorder (e.g. DVD recorder) 10 GB 4: 4: AV cable (not supplied) Antenna cable (not supplied) Antenna cable (not supplied) DVD Player 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2 Install a machine screw (M4, not supplied) into the screw hole of the TV. 3 Tie the wood screw and the machine screw with a strong cord (not supplied). The length of the M4 machine screw differs depending on the cord diameter. Please refer to below illustration. Screw M4 Cord 5 - 6 mm TV’s Table-Top Stand Getting 11 GB 12 GB 6: Organizing the AC power cord/Bundling the cables B KDL-46/40/32CX52x B Except KDL-46/40/32CX52x ~ • Before bundling the cables, remove the cable holder from the AC cover (see step 1 and 2). Reuse the cable holder (see step 3) to bundle the other cables (see step 4). • Do not bundle the AC power cord together with other cables. * When installing on the wall, attach the cable holder under the terminals. AC power cord * 3 4 1 2 3 4 1 2 3 4 1 2 KDL-55/46/40/32EX723, KDL-60/55/46/40/32EX720, KDL-46/40/32EX523, KDL-46/40/32EX520 and KDL-32EX420 (except Australia and New Zealand model) KDL-32EX420 (Australia and New Zealand model) KDL-26/22EX423 and KDL-26/22EX420 7: 7: Except For KDL-46/40/ KDL-46/40/32CX52x 32CX52x 1 Connect the TV to your AC power outlet (mains socket). 2 Press 1 on the TV. The " (power) indicator will light green. When you switch on the TV for the first time, the Language menu appears on the screen. ~ • When you turn on the TV for the first time, the TV requires some internal processing for optimization before you can perform the initial setup. There will be no picture and sound, and the timer indicator on the front of the TV blinks orange for about 40 seconds. Do not turn off the TV during this process. This process has been completed at the factory on some TVs. 3 Follow the instructions on the screen. Programme Sorting: Changes the order of analogue channels stored in the TV. 1 Press F/f to select the channel you want to move to a new position, then press . 2 Press F/f to select the new position for the channel, then press . ~ • You can also tune channels manually. Getting 13 GB Using Your BRAVIA TV Using Your BRAVIA TV 1 2 GUIDE 3 z • The number 5, N, PROG + and AUDIO buttons on the remote have a tactile dot. Use the tactile dots as a reference when operating the TV. 1 Turn on the TV. Press 1 on the TV to turn on the TV. 2 Select a mode. 3 Select a TV channel. To use Digital Electronic Programme Guide (only available for EPG supported countries/ regions) Press GUIDE in digital mode to display the programme guide. Use with 0-9 to select digital channels. For channel nu...