Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Then press B. 3 After selecting the Channel option, press OK. Next press v or V to select the channel tuning ("C" for terrestrial channels or "S" for cable channels). Then press the number buttons to enter directly the channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press b and v or V to search for it. When you have tuned the desired channel, press OK twice to store. Repeat all the above steps to tune and store more channels. b) Label a channel using up to five characters. To do this: Once you have entered the “Set Up”menu as it is explained on page 30 and after selecting the "Manual Programme Preset" option, press OK. Next with the Programme option, highlighted press the PROG +/-button to select the programme number with the channel you wish to name. When the programme you want to name appears on the screen, press v or V to select the Label option and press OK. Then, with the first element highlighted, press v, V, B or b to select the letter, next press OK. When you have finished, press v, V, B or b to select the word “End” on the screen and finally press OK to turn off the menu from the screen. Finally press OK to store. • To correct a letter, select "%" on the screen to go back and press OK. • For a blank, select " " on the screen and press OK. TV Functions c) Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture, however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted. To do this: While watching the channel (TV Broadcast) you wish to fine tune, and once you have entered the “Set Up” menu as it is explained on page 30 and after selecting the "Manual Programme" option, press OK. Then press v or V to select the AFT option and press b. Next press v or V to adjust the fine tuning between -15 and +15. Finally press OK twice to store. d) Improve the sound for individual channels in the case of distortion in mono broadcasts. (Not available when “System” is set to “L”.) Sometimes a non standard broadcast signal can cause sound distortion or intermittent sound muting when watching mono programmes. The Audio Filter option allows you to reduce this effect. If you do not experience any sound distortion, we recommend that you leave the Audio Filter option set to the default setting of “Off”. To do this: Once you have entered the “Set Up” menu as it is explained on page 30 and after selecting the “Manual Programme Preset” option, press OK. Next, press v or V to select the Audio Filter option and press b. Next press v or V to select Off, Low or High. You can not receive stereo or dual sound when “Low” or “High” is selected. e) Skip any unwanted programme numbers when they are selected with the PROG +/-buttons. To do this: Once you have entered the "Set Up" menu as it is explained on page 30 and after selecting the "Manual Programme Preset" option, press OK. Next with the Programme option highlighted, press the PROG +/- button to select the programme number you want to skip. When the programme you want to skip appears on the screen, press v or V to select the Skip option and press b. Next press v or V to select On. Finally press OK twice to confirm and store. To cancel this function afterwards, select “Off” instead of “On” in the step above. f) View and record scrambled channels (e.g. from a pay TV decoder) when using a decoder connected to Scart 1/ 1 directly or through a VCR. This option is only available depending on the country you have selected in the “Country” menu. To do this: Once you have entered the "Set Up" menu as it is explained on page 30 and after selecting the "Manual Programme Preset" option, press OK. Next press v or V to select the Decoder option and press b. Next press v or V to select On. Finally press OK twice to confirm and store. To cancel this function afterwards, select "Off" instead of "On" in the step above. GB 33 TV Functions Other Functions Sleep Timer This function allows you to set the TV to switch itself automatically to standby mode after a specified time period. The following time periods can be selected: 30, 60, 90 and 120 minutes. To do this: Press the button on the remote control repeatedly until the desired time period appears on the screen. When the Sleep Timer feature is on, the (Standby/Sleep) indicator on the TV lights up in red. To cancel the Sleep Timer feature: Press the button on the remote control repeatedly until “Off” appears on the screen. • If you switch off the TV and switch it on again, the Sleep Timer feature is reset to “Off”. • Press the button on the remote control to display the time remaining before the TV switches to standby mode. • The message “Sleep Timer will end soon. Power will be turned off.” Appears on the screen 1 minute before the TV switches to the standby mode. Picture Freeze This function allows you to freeze the TV picture (e.g. to make a note of a telephone number or recipe)....