Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
By following the instructions below, this projection TV automatically searches and stores all available channels for you. After having selected the language, a new menu appears automatically on the projection TV screen asking you to automatically tune the TV. However, if you need to change or repeat the tuning afterwards (e.g. when you move house), select the menu Auto Programme in the (PRESET) menu and proceed in the same way as described below or, please refer to the section "Automatically Tuning the TV" of this instruction manual. S RM 892 PROGR MENU 1 4 7 2 5 8 0 3 6 9 VIDEO TV 1 Press the OK button on the remote control to select YES. A new menu appears automatically on the screen asking you to check that the antenna is connected. 2 Confirm that the antenna is connected and then press the OK button. The automatic tuning starts and the message "AUTO PROGRAMME" flashes on the screen. This procedure could take some minutes. Please, be patient and do not press any button, otherwise the automatic tuning will not be completed. When the automatic tuning is finished, the Programme Sorting menu appears on the screen. Notes: • To stop the automatic tuning, press the MENU button. • If you stop the automatic tuning by pressing the MENU button, the Programme Sorting menu does not appear automatically on the screen. Do you want to start automatic tuning? Yes No Confirm: OK Please confirm that antenna is connected Confirm: OK PROG 1 AUTO PROGRAMME AUTO PROGRAMME SYS B/G CH C 26 LABEL - - - - PROG SYS CHAN LABEL PROGRAMME SORTING B/G B/G B/G B/G B/G B/G B/G B/G B/G B/G 0 1 2 3 4 5 6 7 8 9 BBC-W MV-CH TVE-1 TVE-2 ANT-3 TELE 5 C PLUS - - - - - - - - CNN C 28 C 40 C 41 C 31 C 34 C 27 C 47 C 44 C 23 C 35 Select PROG: + OK Exit: MENU Getting Started - First Time Operation Getting Started - First Time Operation Changing the Programme Order of the TV channels After all available channels (TV Broadcast) are captioned and stored, a new menu appears automatically on the screen to change the order in which the channels appear on the screen. However, if you wish to rearrange the order of the channels afterwards, select the menu Programme Sorting in the (PRESET) menu and proceed in the same way as described in the b) section of this chapter. a) If you do not wish to change the channel order: S RM 892 PROGR MENU 1 4 7 2 5 8 0 3 6 9 VIDEO TV PROG SYS CHAN LABEL PROGRAMME SORTING B/G B/G B/G B/G B/G B/G B/G B/G B/G B/G 0 1 2 3 4 5 6 7 8 9 BBC-W MV-CH TVE-1 TVE-2 ANT-3 TELE 5 C PLUS - - - - - - - - CNN C 28 C 40 C 41 C 31 C 34 C 27 C 47 C 44 C 23 C 35 Select PROG: + OK Exit: MENU 1 Press the MENU button on the remote control to exit and return to the normal TV screen. When the automatic tuning is finished, the Programme Sorting menu appears on the screen. b) If you wish to change the channel order: GB 1 Push the joystick on the remote control to $or 4to select the programme number with the channel (TV Broadcast) you wish to rearrange, then press OK. 2 Push the joystick to $or 4to select the new programme number position for your selected channel (TV Broadcast), then press OK. The selected channel now moves to its new programme position and the other channels move accordingly. PROG SYS CHAN LABEL PROGRAMME SORTING B/G B/G B/G B/G B/G B/G B/G B/G B/G B/G 0 1 2 3 4 5 6 7 8 9 BBC-W MV-CH TVE-1 TVE-2 ANT-3 TELE 5 C PLUS - - - - - - - - CNN C 28 C 40 C 41 C 31 C 34 C 27 C 47 C 44 C 23 C 35 Select PROG: + OK Exit: MENU B/G B/G B/G B/G B/G B/G B/G B/G B/G B/G 0 1 2 3 4 5 6 7 8 9 MV-CH TVE-1 TVE-2 ANT-3 TELE 5 C PLUS - - - - - - - - CNN BBC- W C 40 C 41 C 31 C 34 C 27 C 47 C 44 C 23 C 35 C 28 PROGRAMME SORTING Select Position: Confirm: OK SYS CHAN LABELPROG 3 Repeat steps 1 and 2 if you wish to change the order of the other channels. 4 Press the MENU button to exit and return to the normal TV screen. Your projection TV is now ready for use. Getting Started - First Time Operation Getting Started - First Time Operation Adjusting Colour Registration (Convergence) Due to the earth’s magnetism, the picture might become undefined and you could see different colours on the outlines of the images. In that case, proceed as follows: Auto converge the Red, Green, and Blue Lines 1 Push up the flap on the front of the projection TV to reveal the front control panel. 2 Press button on the projection TV. The Auto Convergence function works for about 30 seconds. When the white cross disappears from the screen, your projection TV is ready for use. Notes: The Auto Convergence function does not work: • when no signal is input. • when the input signal is weak. • when the screen is exposed to spotlights or direct sunlight. • when you watch the teletext broadcast. If you wish a more accurate convergence adjustment S RM 892 PROGR MENU 1 4 7 2 5 8 0 3 6 9 VIDEO TV 1 Press the MENU button on the remote control to display the menu on the screen. PICTURE CONTROL Picture Mode Personal Contrast Reset Format 4:3 2 Push the joystick to $to select the symbol , then push to z...