Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
• If your amplifier has the Dolby Pro Logic Surround system, connect the center speaker output of the amplifier to the speaker system’s CENTER SPEAKER terminal as well. Rear side Note Use either the LOW LEVEL or HIGH LEVEL terminals for connection. Using both may result in a malfunction. Speaker system Amplifier TV Do NOT connect both the low level and high level terminals Before you get started • Turn off the power of the KL-50W series TV or amplifier and the speaker system before making any connections. • Use the audio connecting cords supplied with the other equipment. If there are not enough audio connecting cords to make the necessary connections, you need to purchase optional audio connecting cords. • Be sure the connections are secure to avoid noise. • Connect the mains lead of the speaker system to a mains outlet. HIGH LEVELLOW LEVEL – + – + CENTER SPEAKER (continued) 5GB Getting Started Getting Started Connecting to the KL-50W series TV What cords will I need? Audio connecting cord (supplied) (1) Hookups Connect the INPUT L and R jacks of the speaker system’s LOW LEVEL terminal to the KL-50W’s audio output jacks with the supplied audio connecting cord. .: signal flow KL-50W Speaker system L/G/S/I R/D/D/D Note When the power of the KL-50W is turned off, turn down the volume, or turn off the power of the speaker system. Otherwise, a popping noise may be heard. Connecting to an amplifier with a special super woofer jack If your amplifier has audio line out jacks or special super woofer jack(s) (like a MONO OUT jack, MIX OUT jack, SUB WOOFER jacks or SUPER WOOFER jacks), use the LOW LEVEL terminal of the speaker system. What cords will I need? Audio connecting cord (supplied) (1) Hookups Connect the INPUT L and R jacks of the speaker system’s LOW LEVEL terminal to the audio line out jacks or one of the special jacks of the amplifier with the supplied audio connecting cord. .: signal flow Amplifier Speaker systemLINE OUT Note • If the special jack on your amplifier is a single jack (e.g. MONO OUT jack) or the audio line out jack is monaural, connect to the INPUT L jack of the LOW LEVEL terminal. .: signal flow Amplifier Speaker system MONO OUT • If the sound is not loud enough, the output level of your amplifier may not be high enough. In this case, connect the speaker jacks of the amplifier directly to the HIGH LEVEL terminal of the speaker system. 6GB Getting Started Getting Started Connecting to an amplifier with speaker jacks Connect the speaker system to the amplifier, then connect the front speakers to this speaker system. What cords will I need? Speaker cord (1 for each speaker) (not supplied) Strip the ends of the cord about 2/3 inch (15 mm) and twist the exposed wire. Be sure to match the speaker cord to the appropriate jack on the components: + to + and – to –. If the cords are reversed, the sound will be distorted and will lack bass. Usually the speaker cord marked with a line is used for positive (+) and should be connected to the positive (+) jack to avoid any improper connections. Hookups 1 Connect the speaker system to the amplifier. Connect the HIGH LEVEL terminal of the speaker system to the amplifier’s speaker output jacks with the speaker cords. Be sure to connect both L and R channels. .: signal flow Amplifier Speaker system SPEAKER – + – + L R 2Connect the front speakers to this speaker system. Connect the front speakers to the OUTPUT jacks of this speaker system’s HIGH LEVEL terminal. Front Speaker (R) Front Speaker (L) Speaker system Connecting to an amplifier with the Dolby Pro Logic Surround system What cords will I need? Speaker cord (not supplied) Strip the ends of the cord about 2/3 inch (15 mm) and twist the exposed wire. Hookups 1 Connect the centre speaker output jack of the amplifier to the CENTER SPEAKER terminal of the speaker system. .: signal flow Speaker system Amplifer – + CENTER SPEAKER – + Note When the power of the amplifier is turned off, turn down the volume, or turn off the power of the speaker system. Otherwise, a popping noise may be heard. What is Dolby Pro Logic Surround? Dolby Pro Logic Surround is a system that decodes the extra channels on movie videos and TV programmes, and produces sound effects and echoes that make the action seem to envelop you. The sound image is improved by using four separate channels: off-screen audio effects, on-screen dialogue, left to right panning, and music. These channels manipulate the sound and enhance the action as it happens on the screen. The unit offers PROLOGIC mode for these systems as one of the sound fields. You can tell if a video tape or laser disc uses Dolby Pro Logic Surround encoded software by looking at the packaging. (Some video tapes and laser discs may use Dolby Pro Logic Surround even if it’s not indicated on the package.) Connecting the mains lead Connect the mains lead of the speaker system and your amplifier to a mains outlet. 7GB OperationsOperations OperationsOperations Listening to the Sound Fron...