Assessments - 0, GPA: 0 ( )

Fabricante : Philips Arquivo Tamanho: 1.71 mb Arquivo Nome : Língua de Ensino:

3. Select [Pixel Plus link] > [On], then press OK. Maximize video display Some subtitles can create a separate subtitle bar under the video, which limits the video display area. After you switch on auto subtitle shift, the subtitles display over the video image, which maximizes the video display area. Switch on auto subtitle shift 1. Press . 2. Select [Setup] > [TV settings] > [EasyLink] > [Auto subtitle shift]. 3. Select [On], then press OK to activate. Note: Make sure that the picture format of the TV is set to [Auto format] or [Movie expand 16:9]. Hear another device at TV standby You can hear a connected HDMI-CEC compliant device through the TV speakers, even when the TV is in standby. 1. Press ADJUST to receive audio from the connected Philips EasyLink device. If available, audio only mode is enabled. 2. Accept the prompt on the TV to turn off the TV screen. 3. Control the audio playback with the TV remote control. 4 Set up your TV Settings assistant Use the settings assistant to guide you through the picture and sound settings. 1. While you watch TV, press . 2. Select [Setup] > [Quick picture and sound settings], then press OK. 3. Select [Start], then press OK. 4. Follow the onscreen instructions to choose your preferred settings. Picture and sound More picture settings 1. Press . 2. Select [Setup] > [TV settings] > [Picture], then press OK. 3. Select a setting to adjust: . [Smart picture]: Access predefined smart picture settings. . [Reset]: Reset to default settings. . [Contrast]: Adjust the intensity of the bright areas, keeping dark areas unchanged. . [Brightness]: Adjust the intensity and details of the dark areas. . [Colour]: Adjust colour saturation. . [Hue]: Compensate colour variations in NTSC encoded transmissions. . [Sharpness]: Adjust sharpness in the image. . [Noise reduction]: Filter and reduce noise in the image. . [Tint]: Adjust the colour balance in the image. . [Custom tint]: Customise tint setting. . [Pixel Precise HD]: Access advanced settings, including [HD Natural Motion], [Clear LCD], [Super resolution], [Dynamic contrast], [Dynamic backlight], [MPEG artefact reduction], [Colour enhancement], [Gamma]. . [PC mode]: Allow picture settings to be changed when a PC is connected to the TV through HDMI. If enabled, you can select [Picture format] > [Unscaled] which provides maximum detail for display of PC content. . [Light sensor]: Adjust settings dynamically to match lighting conditions. . [Picture format]: Change the picture format. . [Screen edges]: Change the picture size. . [Picture shift]: Adjust the position of the picture. You cannot select this setting if the selected picture format is Auto zoom or Wide screen. More sound settings 1. Press . 2. Select [Setup] > [TV settings] > [Sound], then press OK. 3. Select a setting to adjust: . [Smart sound]: Access predefined smart sound settings. . [Reset]: Reset to factory default settings. . [Bass]: Adjust the bass level. . [Treble]: Adjust the treble level. . [Surround]: Enable spatial sound. . [Headphones volume]: Adjust headphone volume. . [Auto volume leveling]: Automatically reduce sudden volume changes, for example when switching channels. . [Balance]: Adjust the balance of the left and right speakers. Audio settings Select audio language If the TV channel has multiple or dual sound broadcast, you can select the preferred audio language. While you watch TV, press OPTIONS. . [Audio language]: Select the audio language for digital channels. . [Dual I-II]: Select the audio language for analogue channels. Digital TV channels can stream several audio languages. If multiple languages are available, select the preferred language. 1. Press . 2. Select [Setup] > [Channel settings] or [Satellite settings] > [Language]. 3. Select one of the following settings, then press OK: . [Primary audio] / [Secondary audio]: Select the available audio language. Set a secondary language in the same menu. If the primary language is unavailable, the TV receives this language. . [Preferred audio format]: Select to receive standard audio format (MPEG) or advanced audio formats (AAC, EAC- 3 or AC-3 if available). . [Mono/Stereo]: Select mono or stereo audio if stereo broadcasting is available. 4. Press to exit. Reset to factory settings You can restore default picture and sound settings, while the channel installation settings remain the same. 1. While you watch TV, press . 2. Select [Setup] > [TV settings] > [Factory settings], then press OK. TV settings are reset to default. Channels Reorder and rename Reorder channels After the channels are installed, you can reorder the channel list to your preference. 1. While you watch TV, press FIND. The channel list is displayed. 2. Select the channel to reorder and press OPTIONS. 3. Select [Reorder], then press OK. 4. Press the Navigation buttons to move the highlighted channel to another location, then press OK. 5. Select one of the following options, then press OK. . [Insert]: Insert the channel into the desired...

Baixe o seu

Para fazer o download, introduza 2 dígitos :