Assessments - 0, GPA: 0 ( )

Fabricante : Philips Arquivo Tamanho: 3.76 mb Arquivo Nome : Língua de Ensino:

System searching. Please wait... Digital channels found: 0 Analog channels found: 0 Auto programming may take more than 20 minutes to complete. Stop 2 Press OK to start the installation. If you run [Autoprogram] when you have locked channels, a message appears asking to enter your PIN . Enter your PIN in order to complete the installation. If you have forgotten your PIN, reset it as described in ‘Changing your PIN’ on page 24. • When autoprogramming is complete, the lowest memorized channel will be displayed. 3 Follow the on-screen instructions to complete the installation. 32 EN ENEN Weak channel installation This function lets you add the channels that were not added by the autoprogram due to the receptible condition at the initial setup. 1 Press MENU on the remote control and then use I/i/I/. to select [Setup] > [Installation] > [Channels] > [Weak channel Installation]. 2 Use I/ . to select channel input box, then use I/i to select a channel you want to memorize. 3 Use I/. to select [Search], then press OK. 4 Display will be changed to [Store] from [Search] when the channel is found, then press OK. 5 Press MENU to exit. Note • In most cases, digital channels are not broadcast on the RF channel on which they appear on your TV.To add digital channels you need to know the RF channel on which the digital channel is being broadcast. E.g. If there is a digital channel 9.1 which is being broadcast on RF channel 25, you need to enter 25 while performing a weak channel installation.To find out the RF channel on which a particular digital channel is being broadcast, please contact your local service provider. Installing digital channels using [Weak channel installation] might not work for direct cable connections and if the digital signal is too weak for the TV to process. Installation mode 1 Press MENU on the remote control and then use I/ i /I /. to select [Setup] > [Installation] > [Channels] > [Installation mode]. 2 Use I/i to select, then press OK. 3 Press MENU to exit. Uninstall channels Those channels can still be selected with the Number buttons. 1 Press MENU on the remote control and then use I/ i /I /. to select [Setup] > [Installation] > [Uninstall channels]. 2 Use I/i to select the channel you want to remove, then press OK. • You will not be able to select the channel again using CH +/.. • To reactivate a removed channel, use I /i and then press OK. 3 Press MENU to exit. Return your settings to default values When you return picture and sound settings to their default values the channel installation settings are not affected. 1 Press MENU on the remote control and then use I/i /I/ . to select [Setup] > [Installation] > [Reset AV settings] > [Start now]. 2 Press OK to reset the picture and sound settings. 3 Press MENU to exit. 8 Update your TV software Philips continuously tries to improve its products and we strongly recommend that you update theTV software when updates are available. New software can be downloaded from our website at using the model number of yourTV (e.g. 55PFL5705D) to find information. Checking your current software version 1 Press MENU on the remote control and then use I /i/ I/ . to select [Setup] > [Software update] > [Current software info] > [Select]. » The version and a description of the current software is displayed. Picture Sound Features Installation Software update Current software info XXXXX Updates 2 Press MENU to exit. Preparing for the software update by USB You require the following equipment: • A PC with web browsing capability. • An archive utility that supports the ZIP-format (e.g.WinZip for Windows or StuffIt for Mac OS). • An empty clean formatted USB stick. Note • Only FAT /DOS-formatted portable memory is supported. • New software can be downloaded from • Use only software updates that can be found on the Philips web site. Warning • When the software update is running, don’t press any buttons. • Do not remove the USB storage device during the software update. • If an error occurs during the update, retry the procedure or contact your dealer. Downloading the software 1 On your PC, open a web browser and go to 2 Find information and software related to your TV and download the latest software update file to your PC. 3 Decompress the ZIP-file. 4 Copy the update file to the root directory of the USB storage device. Updating software USB update You can update the software by using USB storage device. 1 If the TV is on, press . POWER at the side of the TV. 2 Connect your USB storage device with the update file to the USB port on the side of your TV. 3 Switch on the TV. 4 Press MENU on the remote control and then use I/ i /I /. to select [Setup] > [Software update] > [Updates] > [USB]. 5 Use I/i to select the desired Update file. 6 Use I/i to select [Yes], then press OK. 7 Read the on-screen instructions and confirm that you want to continue with the installation. Software update is in progress. Please wait. Do not remo...

Baixe o seu

Para fazer o download, introduza 2 dígitos :