Assessments - 0, GPA: 0 ( )

Fabricante : Philips Arquivo Tamanho: 4.45 mb Arquivo Nome : Língua de Ensino:

Remove the AC power cord from the power socket outlet, wait 60 seconds and reconnect the AC power cord. Connect the TV to a different power socket outlet. HDCP authentication fail. Ensure that your HDMI cable is cer tified. Press SOURCE on the remote control to switch to another source and then switch back to the HDMI source. Reset the accessor y device and the TV. Turn on the TV. Select the HDMI channel. Turn on the accessor y device. While the TV and the accessor y device are powered on, unplug either end of the HDMI cable and then reinser t the cable. An incorrect HDMI input jack is connected or an audio cable is not connected. Connect a HDMI-DVI cable to the HDMI 1 input jack on the TV. Connect an audio cable to the HDMI 1-IN on the TV. Press SOURCE on the remote control, and select the HDMI 1 source. Batteries are installed incorrectly, or low batter y power. Ensure the indicator light on the TV blinks when you press the remote control buttons. Ensure that you are using the TV remote control. Ensure that the batteries are inser ted correctly and do not need to be replaced. Remove the AC power cord from the power socket outlet, wait 60 seconds and reconnect the AC power cord. The picture is Broadcast video format. distor ted, stretched Press FORMAT on the remote control to select out, or has black the best picture format. bars on the side For some accessor y devices, the picture format or top. must be set in the accessor y device. The picture is Insecure / incorrect connection. mostly red and Ensure all the connections are made according togreen, or the the color code. picture misses red Push the component cables all the way into the when connected to YPbPr sockets on the TV. an accessor y device via component cables. No picture or sound - ensure you have selected the correct channel. Incomplete channel installation. If the TV receives channels via an AV connection, set the TV to the correct source input. If the TV is connected directly to the wall via a coaxial connection, perform the auto-installation again. 11 Notes for the use of USB devices Digital Content Issues • Only FAT (DOS) formatted (initialized) portable memory is supported. Errors in this formatting can result in unreadable content. If such problems appear try to re-format the card. Be aware that formatting the card will also delete all the content on it(pictures, videos, …). • Only linear JPEG picture formats are supported. Progressive JPEG and JPEG2000 encodings are not supported. • The length of a filename or directory name is limited to the lengthspecified by the FAT16/32 file systems. • Max. levels of nested directories is 19. • Never use the supported file type extensions (.jpg, .jpeg) asextensions for directories as these directories will be treated as corrupted files. • The access and response time of the content on a device can differ depending on the type or brand of the device. • The access and response time of the content on a device willincrease the more unsupported or corrupted files are on thedevice. Digital Camera Issues • If a USB connection between your digital camera and the TV isn’t working, you can try the solutions below to resolve your problem. • Make sure your digital camera is switched on and verify if theconfiguration of your digital camera is correct (see the manual of your digital camera for more information). • Some digital cameras allow you to switch off the USB interface. Make sure that the USB interface is switched on before connectingto the TV. • If you have a digital camera with only internal memory (no removable memory) you can try to copy the content manually toa USB memory device (e.g. Philips KEY product) using a personal computer. • Some digital cameras allow you to switch between PTP (PictureTransfer Protocol) or “PC Link” and USB Mass Storage or “PC Drive”. Make sure that you select USB Mass Storage or “PC Drive” on your digital camera. • If your camera supports different interface settings be sure to trythem one by one or contact the reseller of your camera to find out the correct setting. USB Memory Device Issues • Devices connected to the USB port of your TV must be “Mass Storage Class” compliant. If your device (digital camera, portable hard disk, …) is not “Mass Storage Class” compliant it will not bedetected by the content browser of the TV. • The following subsets of the Mass Storage Class specification are supported. • The implementation of the TV is based on the “Universal Serial Bus Mass Storage Class Specification Overview” (v1.2, June 23,2003) including all documents referenced by the document.The document can be found on the USB standardization website (• Full support of the USB Mass Storage Class Bulk-Only Transport (bInterfaceProtocol = 50h). • Full support of SubClass Code = 05h; SFF-8070i spec. • Full support of SubClass Code = 06h; SCSI transparent command set. • For large USB memory devices, when you are in the Content Browser, it may take a long time before you can ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :