Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
To clear ever ything, and return the standard items as the default, press d for 5 seconds. MENU E Using the radio Choosing radio mode Press the Z key on the remote control to switch the TV to radio mode. Press the X key to return to TV mode. In radio mode the number and name of the station (if available), its frequency and the sound mode are indicated on the screen. Selecting programmes Use the 0/9 or @ P # keys to select the FM stations (from 1 to 40). List of radio stations Press the . key to display / hide the list of radio stations. Then use the cursor to select a station. Using the radio menus Use the H key to access the specific radio settings. Searching radio stations If you have used the quick installation all the available FM stations will be stored. To start a new search use the Install menu : Auto Store (for a complete search) or Manual Store (for a station by station search).These menus work in exactly the same way as the TV menus. Screen saver In the Features menu you can activate / close the screen saver. Using in PC monitor mode PC Mode Your TV can be used as a computer monitor. The PIP function lets you display a superimposed image to watch the TV channels at the same time. You must first of all connect the computer and adjust the resolution (see p.11). Choosing PC mode Press the V key on the remote control to switch the TV to PC-A mode (VGA In) or PCD mode (DVI In).Press the X key to return to TV mode. If there is no PC signal for more than five seconds, the TV automatically goes into standby mode. Using PIP While in PC mode you can call up a window for TV channels. Attention: the PIP feature is only available if a computer is connected to the DVI In (see p. 11). & Press the oe key to display the PIP screen. The television image is reproduced in a small superimposed window. e Subsequent presses of the oe key changes the size of the window, switches to dual screen and turns PIP off. “ Use the @ P # keys to change the programmes of the PIP screen or the n key if you want to display a picture from an appliance connected to the TV (e.g. video recorder, DVD). Using the PC menus Press the H key to access the specific settings of the PC monitor mode. Use the cursor to adjust them (the settings are automatically saved) : • Picture : -Brightness / Contrast : to adjust the brightness and contrast. -Horizontal / Vertical : to adjust the horizontal and vertical placing of the image. -Adjust Colour : to adjust the colours (cold, normal or warm). • Audio Selection : to choose the sound reproduced on the TV (PC or TV/Radio). For example, you can listen to the radio while you use the computer. • Features : -Phase/Clock* : eliminates the horizontal (Phase) and vertical (Clock) interfering lines. -View Format : to choose between large screen or the original format of the PC screens. -PIP Controls : to adjust the size and position of the PIP screen. -Auto Adjust : position is set automatically. • Reset To Factory Setting : to return to the factory settings (default settings). • Mode Select : to come back to TV or radio mode. *These adjustments are not available when a computer is connected to the DVI In. Connecting peripheral equipment The television has 2 external sockets situated at the back of the set (EXT1 and EXT2). The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs. The EXT2 socket has audio, CVBS/S-VHS inputs and audio, CVBS outputs. AV in AV 3 S-VIDEO FM ANT EXT 1 EXT 2 Audio Out VGA In DVI In Audio In : Video recorder EXT 1 EXT 2FM ANT : VCR Other equipment FM ANT : EXT 1 EXT 2 Carry out the connections shown opposite, using a good quality euroconnector cable. If your video recorder does not have a euroconnector socket, the only connection possible is via the aerial cable.You will therefore need to tune in your video recorder's test signal and assign it programme number 0 (refer to manual store, p. 5). To reproduce the video recorder picture, press 0. Video recorder with decoder Connect the decoder to the second euroconnector socket of the video recorder.You will then be able to record scrambled transmissions. Satellite receiver, decoder, CDV, games, etc. Carry out the connections shown opposite. To optimise picture quality, connect the equipment which produces the RGB signals (digital decoder, games, etc.) to EXT1, and the equipment which produces the S-VHS signals (S-VHS and Hi-8 video recorders, certain DVD drives) to EXT2 and all other equipment to either EXT1 or EXT2. To select connected equipment Press the n key to select EXT1, EXT2/S-VHS2 (S-VHS signals from the EXT2 socket) and AV/S-VHS for connections on the front panel. Most equipment (decoder, video recorder) carries out the switching itself. Side connections Amplifier AV in AV 3 S-VIDEO Audio VGA DVI Audio Out In In In Audio in Make the connections as shown opposite. With the n key, select AV/S-VHS. For a mono set, connect the sound signal to the AUDIO L (or AUDIO R) input. The sound automatically comes out of the left and...