Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
It has been preprogrammed by your installer and contains a so-called configuration file that contains all the codes, graphical buttons and navigation behaviour. TSU9400 Starter’s Guide QVGA touch screen Firm keys Stylus Hard keys Rotary wheel Cursor keys Power switch USB connector Backlight key Page + / Page – keys Power adapter Control Panel Docking Station T aking a First Look Panel connector ENGLISH TSU9400 Starter’s Guide Charging the Control Panel When the Battery level icon on your screen turns red, it is time to charge the Control Panel. Depending on how your installer has configured the Control Panel, it can be operated for one to several days. Note The lifetime of the battery depends on the time out settings and the settings of the wireless network configured by your installer. If you notice that the battery is deteriorating, please contact your installer. When you place the Control Panel in the docking station, the red Charging LED on the front of the docking station lights up. When the Charging LED fades out, the Control Panel is fully charged. This can take 3 to 4 hours. When the battery is low and the Charging LED does not light up, make sure that: • the power switch on the left side of the Control Panel is switched to “1”. • the docking station is plugged in the wall outlet. When it is plugged in, the docking station glows. • the Control Panel is placed properly in the docking station. • the connector in the docking station is clean and free of obstructions. Tip It is advised to place the Control Panel in the docking station after use. Even when the screen of the Control Panel turns black, the Control Panel is still using power. Enjoying Your Pronto Control Panel Controlling Your Home Theater Activating the screen of the Control Panel • Tap the touch screen with the stylus enclosed or with your finger. -Or• Press the Backlight key. TSU9400 Starter’s Guide Depending on the settings made in the Screen Settings page, the screen is also activated when you: • tilt the Control Panel sufficiently towards you. . 50° -or • press one of the 5 firm keys below the screen or one of the hard keys. Note The following hard keys send out commands to your equipment without activating the screen: Channel Up/Down, Volume Up/Down, Menu, Guide, Power, Mute, Info, Back. ENGLISH Operating the Control Panel Buttons on the touch screen These buttons are used to • Start an activity in the Home Theater • Control the individual devices in the Home Theater Firm keys The actions for the firm keys are activity related and can differ depending on the page visible on the screen. Battery level WiFi activity WiFi strength (4 levels) No identification No connection No No network icon Wireless Communication present Hard keys on the Control Panel The hard keys on the Control Panel have fixed functions in the different activities of the Home Theater. Note The screens of your Control Panel are customized by your installer and could look different from the one on the image above. TSU9400 Starter’s Guide Turning the Control Panel On/Off Power switch The Power switch on the left side of the Control Panel turns the Control Panel on and off. Tip Always switch off the Control Panel during transport to avoid the activation of the touchscreen and battery draining. Changing the Pronto Settings Notes It is possible that your installer has blocked the access to the Settings pages. Normally, your installer has fully programmed your Control Panel and no changes are required. T o open the Settings pages: • Press and hold the Settings icon for more than 3 seconds. General On the Info Page you can find the version and network information and memory status. The General volume refers to all sounds you hear when you operate the Control Panel. The Button volume specifically refers to the default sound you hear when you press a button. To change the Volume settings • Tap the ‘-’ and ‘+’ buttons to adjust the volume settings. To access the other Settings pages: • Tap the Page +/Page - key. To change Date & Time settings 1 Tap the Month, Day, Year, or Time button. The button is highlighted. 2 Tap the ‘-’ and ‘+’ buttons to adjust the date or time. Tip Press and hold the ‘+’ and ‘–’ buttons to decrease or increase the setting faster. TSU9400 Starter’s Guide Screen Note The screen is calibrated in the factory. Do not use this function unless you experience problems with the touch screen. To change the Activation Settings: • Tap the buttons to toggle between the different Activation settings: Pick up sensor: the Control Panel switches on when it is tilted. Firm keys: the Control Panel switches on and/or sends out IR when a firm key is pressed. Cursor keys: the Control Panel switches on and/or sends out IR when one of the cursor keys is pressed. To calibrate the touch screen: 1 Tap the Calibrate button. 2 Follow the on screen instructions to tap the 4 corners of the screen. The touch screen is calibrated. • Tap the ‘-’ and ‘+’ buttons to adjust the settings. T...