Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. The packaging of this product is intended to be recycled. Contact your local authorities for information about how to recycle the packaging. When this logo is attached to a product, it means a financial contribution has been paid to the associated national recover y and recycling system. © 2012 Koninklijke Philips Electronics N.V. All rights reser ved. Reproduction in whole or in par t is prohibited without the written consent of the copyright owner.Trademarks are the proper ty of Koninklijke Philips Electronics N.V. or their respective owners. 2 Your SDV8622T/27 Congratulations on your purchase and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at com/welcome. English EN 5 6 h 25mm wood screws i 6m coax cable with connectors j Weather boot k Power inserter l Plastic anchors m Washer n 40mm Hexagon screw What’s in your box a SDV8622T/27 antenna b Power supply 100-240V AC / 6V DC 500mA c Wall/Mast bracket d Nut e U-Bolts f Mast clamps g Nuts with lock washers 11 1 2 4 7 8 9 10 12 5 6 3 13 14 4x 2x 2x 4x 4x 1x 1x 1x 1x 1x 1x 1x 1x EN 3 Get started Installation Installation information This antenna uses a power inser ter module to power the antenna amplifier. It is essential for proper operation of this antenna system that the power inser ter be connected between the antenna and any devices such as splitters, matching transformers, networks, etc. abcd a Antenna with built-in amplifier b Power inser ter module c Splitters or matching transformers (not included) d TV or video device Determine the signal strength Before Installation, determine the best location for optimum reception. It is impor tant for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. Note • Indoor, choose a location near a window which gives the antenna a clear view of the transmitter. Note • Place the antenna away from metal sur face to avoid interference. For indoor wall mount installation Note • Complete all assembly work on the ground before installing on a wall or an antenna mast. 1 Use the nut , washer , and hexagon screw to attach the antenna to the wall/mast bracket. 2 Use the screw holes of the wall/mast bracket as a guide to mark position for the wood screws. English EN 7 8 For outdoor mast mount installation Note •• Complete all assembly work on the ground. Raise the completed antenna after assembly. 1 Use the nut , washer , and hexagon screw to attach the antenna to the wall/mast bracket. 2 Insert U-bolts into the holes of the wall/mast bracket . Slide the mast clamps onto the U-bolts . Attach the four nuts with lock washers to the U-bolts . 3 For wood wall Use the wood screws to fix the antenna to the wood wall firmly. For concrete wall Drill four holes on concrete wall, put four plastic anchors into the holes. Use wood screws to fix the antenna to the concrete wall firmly. 27±5mm 1 1”±0 2” 3 2mm (1/8”) 35±5mm 1 4”±0 2” 7 9mm (5/16”) EN 9 Rotate You can make a 90 degree rotation to the antenna or the mounting post. 3 Attach the assembly to the mast firmly. 4 Rotate the mast in its mount to adjust the direction. 5 Attach the coaxial cable to the F connector on the underside of the unit. Position the weather boot over the connection. English EN 10 Warning •• The power inserter and power supply are for indoor use only. Tip •• This antenna includes a 19.7ft roll of 3C-2V coaxial cable. If this is not adequate for your needs, replace the cable with a RG-6 coaxial cable instead of adding an extension. Set up a digital tuner with this antenna You can install available channels with the digital TV tuner. This automatic process is part of the setup of the tuner. Ensure the antenna has set up properly before the tuner can receive viewable channels. There are two ways to connect the antenna to the TV: • Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically . • Connect the antenna directly to the TV. Tune to the analogue channels and find the best antenna location. Then reconnect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner. Connect to the TV Note •• As previously noted, the amplifier (Power inserter + Power supply) must be placed inline between the antenna and any splitter or additional devices. 1 Connect the coaxial cable from the antenna to the connector labeled ANT on the power inserter . 2 Connect the power inserter to the antenna input on the TV, digital set-top box, splitter or other devices. 3 Connect the power supply plug to the power inserter , and then plug the power supply adaptor into a 100-240V AC receptacle. EN 4 Frequently asked questions Can this antenna work with Analogue transmissions? Yes, this...