Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
English Using in PC monitor mode NOTE -When using your set as a PC monitor, slight diagonal interference lines may be observed when it is operated under electromagnetic interference environment but will not affect the performance of this product. English Using in PC monitor mode NOTE -When using your set as a PC monitor, slight diagonal interference lines may be observed when it is operated under electromagnetic interference environment but will not affect the performance of this product. -For better performance, good quality DVI/VGA cable with good noise isolation filter is recommended. Note: You must first of all connect the computer and adjust the resolution (see p.13). & Press the AV key on the remote control to display the Source list. e Use the keys ooe to select PC and then press . to switch to PC mode (DVI). “ To return to TV mode, repeat steps & and e, but select TV instead. Using the PC menus Press the MENU key to access the specific settings of the PC monitor mode. Use the cursor to adjust them (the settings are automatically saved): Picture • Brightness/Contrast: to adjust the brightness and contrast. • Horizontal/Vertical*: to adjust the horizontal and vertical placing of the image. • Colour Temp: to adjust the colours (cool, normal or warm). Audio selection To choose the sound reproduced on the set (PC or TV). Features • Phase/Clock*: eliminates the horizontal (Phase) and vertical (Clock) interfering lines. • Format: to choose between Full screen or Native format. • PIP: to adjust the size and position of the PIP screen. • Auto adjust*: position is set automatically. Reset to Factory To return to the factory settings (default settings). * These adjustments are not available when a computer is connected to the DVI input. 9 Using in HD (High Definition) mode The HD (High Definition) mode allows you to enjoy clearer and sharper pictures through the DVI inputs if you are using a HD receiver/ equipment that can transmit high definition programming. You must first of all connect the HD equipment (see p.13). & Press the AV key on the remote control to display the Source list. e Use the keys ooe to select HD and then press . to switch the TV to HD mode. “ To return to TV mode, repeat steps & and e, but select TV instead. Using the HD menus Press the MENU key to access the specific settings of the HD mode. Use the cursor to adjust them (the settings are automatically saved): Picture • Brightness: this changes picture brilliance. • Colour: this changes the intensity of the colour. • Contrast: this changes the difference between the light and dark tones. • Sharpness: this changes the picture definitions. • Colour Temp.: this changes the colour rendering: Cool (more blue), Normal (balanced) or Warm (more red). • Store: to store the picture adjustments and settings. Sound • Equalizer: to adjust the sound tone (from bass 120 Hz to treble 10 kHz). • Balance: this balances the sound on the left and right speakers. • Delta Volume: this is used to compensate any volume discrepancies between the different programmes or EXT sockets. This setting is available for programmes 0 to 40 and the EXT sockets. • AVL (Automatic Volume Leveler): this is used to limit increases in sound, especially on programme change or advertising slots. • Dolby Virtual: to activate/deactivate the surround sound effects. You can also access these settings with the Q key. • Store: this is used to store the sound settings. Features • Sleep: to select an automatic standby period. • PIP: to adjust the size and position of the PIP screen. • Horizontal shift: adjust the horizontal placing of the image; Using PIP in PC and HD mode While in PC or HD mode you can call up a window for TV channels. The PIP function lets you display a superimposed image to watch the TV channels at the same time. Attention: The PIP feature is only available if a computer or HD device is connected to the DVI input and if your PC or HD device has a digital output (DVI OUT to DVI IN). See p. 13. & Press the . key to display the PIP screen. The television image is reproduced in a small superimposed window. e Subsequent presses of the . key changes the size of the window, switches to dual screen and turns PIP off. “ Use the -P+ keys to change the programmes of the PIP screen. Note: No audio selection possible in HD PIP mode. English Connecting Peripheral Equipment The television has 3 external sockets situated at the back of the set (EXT1, EXT2 and DVI) and sockets on the side. Press the AV key on the remote control to display the Source list. Select TV or peripheral equipment connected to EXT1, EXT2/SHVS2, AV/SVHS3, PC or HD. English Connecting Peripheral Equipment The television has 3 external sockets situated at the back of the set (EXT1, EXT2 and DVI) and sockets on the side. Press the AV key on the remote control to display the Source list. Select TV or peripheral equipment connected to EXT1, EXT2/SHVS2, AV/SVHS3, PC or HD. The EXT1 socket has audio, CVBS/RGB inputs an...