|
Facilidade de uso
Press , to select an signal index table input source, press m/M, then press OK. Using the Menu Navigating through menus 2,3,4 4 1 1 Press MENU to display the menu. 2 Press M/m to select a menu icon, press ,. 3 Press M/m/, to select an option. 4 Press M/m/, to change/set the setting, then press OK. To exit the menu, press MENU. To return to the last display, press <. Continued Using the Overview of the menus The following options are available in each menu. For details on navigating through menus, see (page 19). Also, see page in parentheses for details of each menu. Picture Adjustment Picture Mode Contrast 2Brightness Colour 3 Hue Sharpness 4 Colour Tone Reset 5 Noise Reduction Iris 1 6 Custom Max 50 50 0 15 Warm Auto High Select: OKSet: End: 1 Picture Adjustment Picture Mode (21) Contrast/Brightness/Colour/Hue/ Sharpness (21) Colour Tone (21) Reset (22)) Noise Reduction (22) Iris (22) 2 Sound Adjustment Sound Effect (23) Treble/Bass/Balance (23) Reset (23) Dual Sound (24) Auto Volume (24) 3 Screen Auto Format (25) Screen Format (25) RGB Center (25) 4 Features AV2 Output (26) TV Speakers (26) PC Adjustment (27) MENU 5 Timer Sleep Timer (28) Clock Set (28) Timer (28) 6 Set Up Auto Start Up (29) Auto Tuning (29) Programme Sorting (29) Programme Labels (30) AV Preset (30) – Label/Skip Manual Programme Preset (30) – Programme/Channel/Label/AFT/Audio Filter/Skip/ATT/Confirm Digital Set Up (32) – Digital Tuning/Digital Set-up Picture Adjustment menu Select: Set: Back: OK End: MENU Picture Mode Contrast Brightness Colour Hue Sharpness Colour Tone Reset Noise Reduction Iris Custom Max 50 50 0 15 Warm Auto High Picture Adjustment You can select the options listed below on the Picture Adjustment menu. To select options, see “Navigating through menus” (page 19). Tip When you set the “Picture Mode” option to “Vivid” or “Standard,” you can adjust only “Contrast,” and “Reset.” Picture Mode Selects the picture mode. 1 Press OK to select “Picture Mode”. 2 Press m/M to select one of the following picture modes, then press OK. • Vivid: For big lighted spaces. • Standard: Optimal picture for home use. • Custom: Allows you to store your own prefered settings. Tip You can change the picture mode by pressing repeatedly. Contrast/Brightness/Colour/Hue/Sharpness 1 Press OK to select the option. 2 Press , to set the level, then press OK. Tip “Hue” can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes). “Brightness”, “Colour”, “Hue” and “Sharpness” only appear and can be adjusted if “Picture Mode” is set to “Custom”. Colour Tone 1 Press OK to select “Colour Tone”. 2 Press m/M to select one of the following, then press OK. • Cool: Gives the white colours a blue tint. • Neutral: Gives the white colours a neutral tint. • Warm: Gives the white colours a red tint. Tip “Warm” only appears and can be adjusted if “Picture Mode” is set to “Custom”. Using the Continued Reset Reset all the picture settings to the factory settings. 1 Press OK to select “Reset”. 2 Press m/M to select “OK,” then press OK. Noise Reduction Reduces the picture noise (snowy picture) in a weak broadcast signal. 1 Press OK to select “Noise Reduction”. 2 Press m/M to select “Auto”, then press OK. Tip This option cannot be used for an input signal from the Y, PB/CB, PR/CR sockets of / 3. Iris Enhances the contrast for dark scenes. 1 Press OK to select “Iris”. 2 Press m/M to select “High”, “Mid”, “Low” or “Off” then press OK. Sound Adjustment menu Select: Set: Back: OK End: MENU Sound Effect: Treble: Bass: Balance: Reset Dual Sound: Auto Volume: Dynamic 0 0 0 A Off Sound Adjustment You can select the options listed below on the Sound Adjustment menu. To select options, see “Navigating through menus” (page 19). Sound Effect 1 Press OK to select “Sound Effect”. 2 Press m/M to select one of the following sound effects, then press OK. • Natural: Enhances clarity, detail, and sound presence by using “BBE High definition Sound System*1.” • Dynamic: Intensifies clarity and sound presence for better intelligibility and musical realism by using the “BBE High definition Sound System.” • Dolby Virtual*2: Uses the TV speakers to simulate the surround effect produced by a multi channel system. • Off: Flat response. Tips • You can change sound effect by pressing 9 repeatedly. • If you set “Auto Volume” to “On”, “Soud Effect” changes to “Natural”. *1 Licensed by BBE Sound, Inc. under USP4638258, 4482866. “BBE” and BBE symbol are trademarks of BBE Sound, Inc. *2 Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Treble/Bass/Balance Reset Adjusts higher-pitched sounds (Treble), adjusts lower-pitched sounds (Bass), and emphasizes left or right speaker balance (Balance). 1 Press OK to select the option. 2 Press , to set the level, then press OK. Resets the “Treble,” “Bass” and “Balance” settings to the factory settings. 1 Press OK to select “Reset”. 2 Press m/M to select “OK,” then press OK. Us...
Este manual também é adequado para os modelos :TV - KDF-E42A12U (1.73 mb)