|
por este dispositivo também tem outras instruções :
Facilidade de uso
• > : Advances forward to the next chapter mark (if any). • : Replays the current programme for a set period of time. • : Advances forward a set period of time. • m : Plays a programme in fast reverse mode. • M : Plays a programme in fast forward mode. • H : Plays a programme at a normal speed. • X : Pauses playback. • x : Stops the playback. • VISUAL SEARCH : Only for Sony DVD recorders with the visual search function. For details, see the operating instructions supplied with the DVD recorder. wf DVD/VCR record buttons • z REC: Starts recording. • X REC PAUSE: Pauses the recording. • x REC STOP: Stops the recording. X REC PAUSE and x REC STOP are available only on DVD recorders. wg F1/F2 • Selects a disc when using a DVD changer. • Selects a function when using a combination unit (e.g. a DVD/VCR). For details, see the operating instructions supplied with the DVD changer or combination unit. wh DVD MENU Displays the DVD disc menu. wj DVD TOP MENU Displays the top menu of the DVD disc. Tips • The number 5, H, PROG + and A/B buttons have tactile dots. Use the tactile dots as references when operating the TV. • When using the remote, aim it at the remote control sensor on the TV. See page 15 for the location of the sensor. 14 GB Overview of the TV buttons and indicators KDS-55A2000 Be careful not to pinch your fingers when opening the cover. 3# 3# MENU KDS-70R2000 1 (page 24) 2 / – Input select/OK • In TV mode (page 23): Selects the input source from equipment connected to the TV sockets. • In TV menu: Selects the menu or option, and confirms the setting. 3 2 +/-/ / • In TV mode: Increases (+) or decreases (-) the volume. • In TV menu: Moves through the options right ( ) or left ( ). 4 PROG +/-/ / • In TV mode: Selects the next (+) or previous (-) channel. • In TV menu: Moves through the options up ( ) or down ( ). 5 – Timer REC programme/Timer indicator • Lights up in orange when the Timer recording is set (page 20, 21). Lights up in red when the recording starts. • Lights up in orange when the timer is set (page 31). 6 – Lamp indicator Flashes in red when the lamp for the light source has burned out. 7 1 – On/standby indicator Flashes in green when the light source is preparing to turn on. Lights up in green when the TV is switched on. Lights up in red when the TV is in standby mode. If the lamp cover or the lamp itself is not securely attached, the red indicator will continue to flash in intervals of three blinks at a time (page 49). 8 Remote control sensor • Receives IR signals from the remote. • Do not put anything over the sensor, as its function may be affected. 9 1 – Power Switches the TV on or off. Note Make sure that the TV is completely switched off before unplugging the mains lead. Unplugging the mains lead while the TV is turned on may cause the indicator to remain lit or may cause the TV to malfunction. Continued 15 GB Projection lamp Your TV uses a projection lamp as its light source. As with any lamp, it has lifespan and needs to be replaced when the lamp indicator flashes or the screen becomes darker. Notes • After switching on your TV, it may take a while (1 minute or less) before the picture appears. • When the projection lamp wears out, the screen goes dark. Replace the lamp with a new Sony XL-5200 (for KDS55A2000, not supplied) or XL-5300 (for KDS-70R2000, supplied) replacement lamp. How to replace the lamp, see page 48. Warning The light emitted from the lamp is quite bright when your TV is in use. To avoid eye discomfort or injury, do not look into the light housing when the power is on. To detach the speakers (KDS-70R2000 only) The speakers on the KDS-70R2000 can be detached if required. If you use a multi-channel surround speaker system and there is insufficient space to install the display unit, we recommend using the speakers detached. 1 Remove the three screws that are located on the rear of the speaker, and pull the speaker straight out to detach it from the panel. When removing the screws, use a coin to turn them counterclockwise. 2 Attach the side cover that came in the box. Press the cover at the top, middle, and bottom to make sure that it is attached securely (see illustration). Note Facing the TV, make sure that the side covers marked “R” (right) and “L”(left) are attached to the corresponding sides of the TV. 3 Tighten the side cover with the three screws that you removed in step 1. When attaching the screws, use a coin to turn them clockwise. 4 Repeat steps 1 through 3 with the speaker on the other side. Note After you remove the speakers, place them in the box that originally contained the side cover. 16 GB Watching TV Watching TV 1 Press 1 on the TV (front) to switch on the TV. When the TV is in standby mode (the 1 (on/ standby) indicator on the TV (front) is red), press TV "/1 on the remote to switch on the TV. 2 Press DIGITAL to switch to digital mode or ANALOG to switch to analogue mode. The channels available vary depending on the mode. 3 Press the number buttons or P...
Este manual também é adequado para os modelos :TV - KDS-55A2000 (6.82 mb)