Assessments - 3, GPA: 3.7 ( )

Fabricante : Sony Arquivo Tamanho: 750.66 kb Arquivo Nome : Língua de Ensino:

Fotos e especificações  Sony  KDL-40S5500

por este dispositivo também tem outras instruções :

TV - KDL-40S5500 (3.66 mb)

TV - KDL-40S5500 (4.77 mb)

TV - KDL-40S5500 (4.27 mb)

TV - KDL-40S5500 (3.59 mb)

Reset Resets all the “Sound Adjustment” settings to the factory settings. Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast. “Stereo”, “Mono”: For a stereo broadcast. “A”/“B”/“Mono”: For a bilingual broadcast, select “A” for sound channel 1, “B” for sound channel 2, or “Mono” for a mono channel, if available. z • If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “A” or “B”. Auto Volume Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend to be louder than programmes). Speaker Turns on/off the TV’s internal speakers. “TV Speaker”: The TV speakers are turned on in order to listen to the TV’s sound through the TV speakers. “Audio System”: The TV speakers are turned off in order to listen to the TV’s sound only through your external audio equipment connected to the audio output sockets. ~ • “Sound Effect”, “Surround”, “Treble”, “Bass”, “Balance”, “Reset” and “Auto Volume” are not available when “Speaker” is set to “Audio System”. 21 GB Using MENU Functions Power Saving Selects the power saving mode to reduce the power consumption of the TV. “Standard”: Default settings. “Reduce”: Reduces the power consumption of the TV. “Picture Off”: Switches off the picture. You can listen to the sound with the picture off. Idle TV Standby Selects the time (“1h”, “2h” or “3h”) to set the TV into standby mode automatically, if you do not operate the TV for the specified period of time. PC Power When this is set to “On,” turns to standby mode if no PC signal is received. Only Management available in PC input. Reset Resets all the “Eco” settings to the factory settings. Features Screen Format Changes the screen format. For details about the screen format, see page 13. z • “Auto” is available for PAL and SECAM signals only. Screen Format “Normal”: Displays the picture in its original size. “Full”: Enlarges the picture to fill the display area. (only in PC mode) RGB Centre Adjusts the horizontal picture position so that the picture is in the middle of the screen. z • This option is only available if an RGB source has been connected to the Scarts connectors / / AV1 or / / AV2 on the rear of the TV. PC Adjustment Customizes the TV screen as a PC monitor. z • This option is only available if a PC signal is received. “Phase”: Adjusts the screen when a part of a displayed text or image is not clear. “Pitch”: Enlarges or shrinkes the screen size horizontally. “Horizontal Shift”: Moves the screen to the left or to the right. “Vertical Shift”: Moves the screen up or down. “Reset”: Resets to the factory settings. Sleep Timer Sets a period of time after which the TV automatically switches itself into standby mode. When the “Sleep Timer” is activated, the (Sleep Timer) indicator on the TV front panel lights up in orange. z • When you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off”. • A notification message appears on the screen one minute before the TV switches to standby mode. 22 GB Auto Start-up Starts the initial set-up to select the language, country/region and location, and tune in all available digital and analogue channels. Usually, you do not need to do this operation because the language and country/region will have been selected and channels already tuned when the TV was first installed (page 7). However, this option allows you to repeat the process (e.g., to retune the TV after moving house). Language Selects the language in which the menus are displayed. Auto Tuning Tunes in all the available analogue channels. (Only in analogue Usually you do not need to do this operation because the channels are already tuned when the TV was first installed (page 7). However, this option allows you to repeat mode) the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters). Programme Sorting Changes the order in which the analogue channels are stored on the TV. (Only in analogue 1 Press F/f to select the channel you want to move to a new position, mode) then press g. 2 Press F/f to select the new position for your channel, then press . AV Preset Assigns a name to any equipment connected to the side and rear sockets. The name will be displayed briefly on the screen when the equipment is selected. 1 Press F/f to select the desired input source, then press . 2 Press F/f to select the desired option below, then press . • AV1 (or AV2/AV3/HDMI1/HDMI2/HDMI3/Component/PC), VIDEO, DVD, CABLE, GAME, CAM, SAT: Uses one of the preset labels to assign a name to connected equipment. • “Edit”: Creates your own label. 1 Press F/f to select the desired letter or number (“_” for a blank space), then press g. If you input a wrong character Press G/g to select the wrong character. Then, press F/f to select the correct character. 2 Repeat the procedure in step 1 until the name is completed, then press . HDMI Set-up Allows the TV to communicate with equipment that is compatible with the...

Baixe o seu

Para fazer o download, introduza 2 dígitos :