Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Cable Management Clip 3 Fit the Cable Management Clip as shown. Cable Management Clip 3 Fit the Cable Management Clip as shown. HOW TO REMOVE THE CABLE MANAGEMENT CLIP (22LD3***) Hold the Cable Management Clip with both hands and pull it backward. NOTE >>Do not use the Cable Management Clip to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged. NOT USING THE DESK-TYPE STAND ¦¦Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover. 26/32/37/42LD3*** 22LD3*** 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Insert the Protection Cover into the TV until clicking sound. Protection Cover 2 Loose the bolts from TV. 3 Detach the stand from TV. Insert the Protection Cover into the TV. 4 Protection Cover Fix the 4 bolts securely using the holes in the back of the TV. 5 ATTACHING THE TV TO A DESK SWIVEL STAND (Only 26/32/37/42LD3***) ¦¦This feature is not available for all models. ¦¦Image shown may differ from your TV. After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. ¦¦Image shown may differ from your TV. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. 4-Screws (not provided as parts of the product) HOW TO SECURE THE POWER CABLE > Screw: M5 x L (*L: Table depth + 8~10 mm) ex) Table depth: 15mm, Screw: M5 x 25 (Only 26/32/37/42LD3****) Stand Secure the power cable with the Protective Bracket and the bolt as shown. It will help prevent the power cable from being removed by accident. Bolt Desk Protective Bracket 1-Screw ( provided as parts of the product) POSITIONING YOUR DISPLAY (Only 22LD3***) Stand ¦¦Image shown may differ from your TV. ¦¦Adjust the position of the panel in various ways for maximum comfort. • Tilt range Desk WARNING >>To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury. KENSINGTON SECURITY SYSTEM CAREFUL INSTALLATION ADVICE ¦¦This feature is not available for all models. ¦¦Image shown may differ from your TV. ¦¦You should purchase necessary components to fix the TV safety and secure to the wall on the market. ¦¦ Position the TV close to the wall to avoid the possibility of it falling when pushed. ¦¦ The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV. The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact com, the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors. 1 1 2 2 2 NOTE >>The Kensington Security System is an optional accessory. >>If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. >>Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. >>Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. 1 Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall. 2 3 3 Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product. NOTE >>When moving the TV undo the cords first. >>Use a platform or cabinet strong and large enough to support the size and weight of the TV. >>To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same. NOTE >>Should Install wall mount on a solid wall perpendicular to the floor. >>Should use a special wall mount, if you want to install it to ceiling or slanted wall. >>The surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block. >>Installing screw type and length depends on the wall mount used. Further info...