Assessments - 4, GPA: 4.5
(
)
)
|
Fotos e especificações Sony KDL-40D3000 |
por este dispositivo também tem outras instruções :
TV - KDL-40D3000 (888.52 kb)
TV - KDL-40D3000 (4.59 mb)
TV - KDL-40D3000 (1.37 mb)
Facilidade de uso
Selects the power saving mode to reduce the power consumption of the TV. When “Picture Off” is selected, the picture is switched off and the (Picture Off) indicator on the TV front panel lights up in green. The sound remains unchanged. Light Sensor “On”: Automatically optimizes the picture settings according to the ambient light in the room. “Off”: Turns off the “Light Sensor” feature. ~ Be sure not to put anything over the sensor, as its function may be affected. See page 10 for further information on the sensor. Product Information Displays your TV’s product information. All Reset Resets all settings to the factory settings and then displays the “Auto Start-up” screen. ~ • Be sure not to turn the TV off during this period (it takes about 30 seconds) or press any buttons. • All settings, including Digital Favourite list, country/region, language, auto tuned channels, etc. will be reset. 29 GB Using MENU Functions PC Settings menu You can select the options listed below on the “PC Settings” menu. To select options in “Settings”, refer to “Navigating through menus” (page 20). Screen Format Selects a screen format for displaying input from your PC. “Normal”: Displays the picture in its original size. “Full 1”: Enlarges the picture to fill the display area, keeping its original horizontal- to-vertical aspect ratio. “Full 2”: Enlarges the picture to fill the display area. Reset Resets the PC settings except “Screen Format” and “Power Management” to the factory settings. Auto Adjustment Automatically adjusts the display position and phase of the picture when the TV receives an input signal from the connected PC. z “Auto Adjustment” may not work well with certain input signals. In such cases, manually adjust “Phase”, “Horizontal Shift” and “Vertical Shift”. Phase Adjusts the phase when the screen flickers. Pitch Adjusts the pitch when the picture has unwanted vertical stripes. Horizontal Shift Adjusts the horizontal position of the picture. Vertical Shift Adjusts the vertical position of the picture. Power Management Switches the TV to standby mode if no signal is received for 30 seconds. 30 GB Analogue Set-up menu You can select the options listed below on the “Analogue Set-up” menu. To select options in “Settings”, refer to “Navigating through menus” (page 20). 1 Digit Direct When “1 Digit Direct” is set to “On”, you can select an analogue channel using one preset number button (0 - 9) on the remote. ~ When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above entering two digits using the remote. Auto Tuning Tunes in all the available analogue channels. This option allows you to retune the TV after moving house, or to search for new channels that have been launched by broadcasters. Programme Sorting Changes the order in which the analogue channels are stored on the TV. 1 Press F/f to select the channel you want to move to a new position, then press . 2 Press F/f to select the new position for your channel, then press . Programme Labels Assigns a channel name of your choice up to five letters or numbers. The name will be displayed briefly on the screen when the channel is selected. (Names for channels are usually taken automatically from Analogue Text (if available).) 1 Press F/f to select the channel you want to name, then press . 2 Press F/f to select the desired letter or number (“_” for a blank space), then press g. If you input a wrong character Press G/g to select the wrong character. Then, press F/f to select the correct character. To delete all the characters Select “Reset”, then press . 3 Repeat the procedure in step 2 until the name is completed. 4 Select “OK”, then press . Continued 31 GB Using MENU Functions Manual Programme Preset Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press PROG +/- to select the programme number with the channel. You cannot select a programme number that is set to “Skip” (page 33). Programme/System/Channel Presets programme channels manually. 1 Press F/f to select “Programme”, then press . 2 Press F/f to select the programme number you want to manually tune (if tuning a VCR, select channel 00), then press RETURN. 3 Press F/f to select “System”, then press . 4 Press F/f to select one of the following TV broadcast systems, then press RETURN. B/G: For western European countries/regions I: For the United Kingdom D/K: For eastern European countries/regions L: For France 5 Press F/f to select “Channel”, then press . 6 Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g. ~ “S” is not available when “United Kingdom” is selected for “Country” (page 6). 7 Tune the channels as follows: If you do not know the channel number (frequency) Press F/f to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press F/f. If you know the channel number (frequency) Press the number buttons to enter the channel number of the broadcast you want or your V...
Este manual também é adequado para os modelos :TV - KDL-32D3000 (5.04 mb)
TV - KDL-46D3000 (5.04 mb)