Assessments - 3, GPA: 4.7 ( )

Fabricante : Sony Arquivo Tamanho: 4.25 mb Arquivo Nome : Língua de Ensino:

Take care not to interfere with cables. 4 Take out the screws from the accessory bag. 5 Fix the TV to the stand using the supplied screws. ~ If using an electric screwdriver, set the tightening torque at approximately 2 N·m (20 kgf·cm) 3: Connecting an aerial/ VCR/ DVD recorder KDL-32P30xx KDL-26P30xx KDL-32U30xx KDL-26U30xx KDL-26S30xx KDL-26S28xx KDL-26T28xx KDL-26T26xx KDL-40P30xx KDL-37P30xx KDL-40U30xx KDL-37U30xx KDL-40P30xx KDL-37P30xx KDL-40U30xx KDL-37U30xx KDL-32P30xx KDL-26P30xx KDL-32U30xx KDL-26U30xx KDL-26S30xx KDL-26S28xx KDL-26T28xx KDL-26T26xx Connecting an aerial only Connecting an aerial/ VCR/ DVD recorder Coaxial cable Scart lead VCR Coaxial cable Coaxial cable Continued 4: Preventing the TV from toppling over 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2 Install a machine screw (M5 x 12, not supplied) into the screw hole of the TV. 3 Tie the wood screw and the machine screw with a strong cord. 5: Bundling the cables 6: Selecting the language, country/region and location 3,4,5 1 Connect the TV to your mains socket (220-240V AC, 50Hz). 2 Press 1 on the TV (top side). When you switch on the TV for the first time, the Language menu appears on the screen. 3 Press F/ f to select the language displayed on the menu screens, then press . Auto Start Up Language Country Location Select: Confirm: 6 GB 4 Press F/f to select the country/region in which you will operate the TV, then press . Auto Start Up Language Country Location Select: Confirm: Back: If the country/region in which you want to use the TV does not appear in the list, select “-” instead of a country/region. 5 Press F/f to select the location type in which you will operate the TV, then press . Auto Start Up Language Country Location Select: Confirm: Back: Home Shop This option selects the initial picture mode appropiate for the typical lighting condition in these enviroments. 7: Auto-tuning the TV 1 Before you start auto-tuning the TV, insert a pre-recorded tape into the VCR connected to the TV (page 4) and start play back. The video channel will be located and stored on the TV during auto-tuning. If no VCR is connected to the TV, skip this step. 2 Press . Back: Start: Cancel: MENU Do youwant to start automatic tuning? The TV starts searching for all available digital channels, followed by channels. This may press any buttons proceeding. If a message appears for you to confirm the aerial connection No digital or analogue channels were found. Check all the aerial connections and press to start auto-tuning again. 3 When the Programme Sorting menu appears on the screen, follow the steps of “Programme Sorting” (page 27). If you do not change the order in which the analogue channels are stored on the TV, go to step 4. 4 Press MENU to exit. The TV has now tuned in all the available channels. ~ When a digital broadcast channel cannot be received, or when selecting a region in which there are no digital broadcasts in step 4 (page 7), the time must be set ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :