Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
TV - LW32A33W (293.26 kb)
TV - LW32A33W (5.5 mb)
Facilidade de uso
7 Select the required device by pressing the or button repeatedly. Result: The following options are available: ---- -VCR - DVD - Cable STB - HD STB Satellite STB - AV Receiver - DVD Receiver Game - Camcorder - DVD Combo - DHR - PC PC mode dose not support STB. 8 When you are satisfied with the setting, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing. Viewing Pictures from External Sources 1 Check that all the necessary connections have been made. 2 Press the SOURCE button. Result: The edited device and audio status are displayed on Top-left of the set. English-44 3 Press the SOURCE button until the required input source is selected. If you change the external source while viewing, pictures might take a short period of time to be switched. BN68-00653C-00Eng 4/13/04 4:48 PM Page 45 Setting up Your PC Software (Based on Widows 2000 or XP) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1 First, click on “ Settings” on the Windows start menu. While “ Settings” is highlighted, move the cursor so that “ Control Panel” is highlighted. 2 When the control panel screen appears, click on “ Display” and a display dialog-box will appear. 3 Navigate to the “ Settings” tab on the display dialog-box. The correct setting of size (resolution) -1280 x 768 pixels If a vertical-frequency option exists on your display settings dialog box, the correct value is “ 60” or “ 60 Hz”. Otherwise, just click “ OK” and exit the dialog box. (Refer to 'Display Mode' on page 59) English-45 PC Screen Automatically Press the PC button on the remote control to select the PC mode. This function does not work in DVI-Digital mode. adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. values of fine, coarse and position are adjusted automatically. BN68-00653C-00Eng 4/13/04 4:48 PM Page 46 adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. values of fine, coarse and position are adjusted automatically. BN68-00653C-00Eng 4/13/04 4:48 PM Page 46 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Setup. Press ENTER button. Result: The options available in the Setup group are displayed. 3 Press the or button to select PC. Press ENTER button. Result: The options available in the PC menu are displayed. 4 Press the or button to select Auto Adjustment. Press ENTER button. Result: After the PC screen twists during the auto adjustment procedure, the screen quality and position are automatically adjusted. English-46 After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. BN68-00653C-00Eng 4/13/04 4:48 PM Page 47 After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. BN68-00653C-00Eng 4/13/04 4:48 PM Page 47 Press the PC button on the remote control to select the PC mode. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Setup. Press ENTER button. Result: The options available in the Setup group are displayed. 3 Press the or button to select PC. Press ENTER button. Result: The options available in the PC menu are displayed. 4 Press ENTER button again. Result: The Image Lock menu is selected. 5 Press the or button to select Coarse or Fine. Press the ENTER button. Result: The horizontal bar is displayed. 6 Press the or button to adjust the screen quality. Vertical stripes may appear or the picture may become blurry. 7 When you are satisfied with the settings, press the MENU button to return to the previous menu or press the EXIT button to return to normal viewing. English-47 Image Position Press the PC button on the remote control to select the PC mode. Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Setup. Press ENTER button. BN68-00653C-00Eng 4/13/04 4:48 PM Page 48 BN68-00653C-00Eng 4/13/04 4:48 PM Page 48 3 Press the or button to select PC. Press the ENTER button. Result: The options available in the PC menu are displayed. 4 Press the or button to select Position. Press the ENTER button. Result: You can adjust the image Position. 5 Press the or button to adjust horizontal position. Press the or button to adjust vertical position. 6 Press MENU button to return to the previous menu or press the EXIT button to return to normal viewing. English-48 BN68-00653C-00Eng 4/13/04 4:48 PM Page 49 Initializing the Image Settings You can replace all image settings with the factory default values. Press the PC button on the remote control to select the PC mode. 1 Press the MENU button. Result...