Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
• For detailed specifications of each function, refer to the NEO Channel Manager. 56 English CH Banner [when a channel number is allocated to an external input] . Notes • The TV channel banner specifications are applied. • When there is an unsupported item or there is no corresponding information, the item values are not displayed. • The channel name is represented as the ‘external input name’. Elements No Name Description 1 External Input Name The Channel List provides access to functions related to GenreTV. • Country Mode • Changes the genre mode. ¦ Mixed Channel Map Mixed Channel Map is a function to mix Air, Cable and Setellite channels. [ Except for Aus, Singapore, NZ models ] – Mixed channel Map should be ON in order to mix Air, Cable and Setellite channels. – Use Channel Editor to sort the channels after turning on 'Mixed channel Map' in Hotel Option Menu. English 57 ¦ Sound Bar • Samsung Sound-Bar & Hospitality TV – Use Samsung Sound-Bar & hospitality TV support HDMI 1.4 to listen to TV sound on the Sound-Bar by using a single HDMI cable. – Supporting model. • Sound-Bar : HW-F350/F450/F550 • Operation of “Hotel Mode” in Sound Bar – The following items for the TV’s hotel option menus should be set in advance. • Hotel option > Power On > Power ON Volume = "Enable" / Power ON Vol / Max Vol • Hotel option > External Device > Sound Bar Out = "On" • Connect an HDMI cable from the HDMI OUT port of Sound-BAR to the HDMI2 port of hospitality TV. • After being connected to the 2013 hospitality TV via HDMI Cable, when the TV turns on, the Sound-Bar automatically detects the TV and then, converts to “hotel mode” by itself. • The change with power-on volume & max volume on TV is applied to the connected sound-bar since TV boots twice. • Features of "Hotel Mode" in Sound Bar – Synchronized power on/off with TV. – HDMI_CEC enabled. – Accessible “HDMI OUT” port only. (Other inputs are disabled) – Synchronizing “power-on”&“max” volume with the TV the Sound-Bar’s volume is set at half of the TV. – Adjustable “power-on”&“max” volume acquired from the TV’s hotel option menu. Sound-Bar volume=TV volume/2 – Example: If the volume settings in TV are “power-on volume=20 and max volume=90”, the sound bar will operates at volume=10, max volume=45. *This function may differ depending on the model. 58 English SIRCH SIRCH • Introduction SIRCH (Samsung Interactive Remote Control for Hospitality) is a professional interactive remote controller for DTV that lets you deliver TV firmware updates, cloning data, and channel mapping changes to several hundred hospitality TVs simultaneously. Mounted at the broadcast head-end system in hotels, motels, resorts, hospitals, and apartment buildings, it delivers modulated RF control signals to hospitality sets in each guest room through coax cable. SIRCH includes PC embedded sy+stems and cable RF modulators which have DVB-C (Europe) and OpenCable (North America) RF output. It also has a 40GB Solid State hard drive, and a 100/1000 Base-T Ethernet port which lets you load TV firmware updates. . SIRCH is sold separately. • System Block Diagram (eg. Headend System in Hotel) SIRCH Headend System for Hotel HD ENCODULATOR HD ENCODULATOR HD ENCODULATOR HD ENCODULATOR Satellite Receiver Independence AV Stream Cable STB Terrestrial Receiver RF Combiner • Features – SIRCH Windows Application SW – 19 inch Rack Unit type, PC embedded Modulator : OpenCable. – Remote Upgrade (TV Software, Cloning Data, Channel Map) – Operation can be controlled by key button, extra key board, monitor, and mouse. – Low Phase noise, High MER, 50~870MHz, +7 ~ -30dBm RF output. • Cautions – SIRCH can operate only in TV RF mode. (OpenCable QAM Modulation). – You can install SIRCH only on TVs in stand-alone mode. Power On Source should be TV. – SIRCH operates only when the SIRCH application version is higher than the TV’s SIRCH version. – You must check the SIRCH application version to ensure it is compatible with the TV firmware version. – The SIRCH function is not supported for satellite channels. (To use the SIRCH function in satellite models, make sure to set the Power On Channel to an Air or Cable channel.) English 59 • SIRCH operating Diagram Hotel Installer can edit the Install Menu/ Channel Map data using the SIRCH windows application program. Coax. TCP/IP RF Cable (Windows Remote Access) You can updated all hospitality TVs in an entire installation. This includes delivering TV firmware, channel mapping, and settings. • SIRCH Installation Considerations There are a number of factors and operations you need to consider when you set up and run SIRCH: 1. Set the SIRCH Update Time – Under normal conditions, use Standby SIRCH. Standby SIRCH updates TVs when they have been in Standby mode for a certain length of time or when they are in Standby mode at a certain time every day. – You can set the standby SIRCH value to Off, 1Hour, 2Hour, 12:00 PM, 02:00 PM, 12:00 AM, or 02:00 AM. – The default value is 1Hour. – When you select “...
Este manual também é adequado para os modelos :TV - HG32EB690QB (5.05 mb)
TV - HG40EB690QB (5.05 mb)
TV - HG46EB690QB (5.05 mb)
TV - HG55EB690QB (5.05 mb)