Assessments - 1, GPA: 3 ( )

Fabricante : Sony Arquivo Tamanho: 14.15 mb Arquivo Nome : Língua de Ensino:

2 Push the joystick to select the symbol, then push to enter the Set Up menu. 3 Push the joystick or to select Manual Set Up then push to to enter. 4 Push the joystick or to select Further Programme Preset, then push to to enter. 5 Push the joystick or to select the relevant programme number, then push repeatedly to select: a) ATT (RF attenuator) b) VOL (Volume Offset) c) AFT (Automatic Fine Tuning) or d) DECODER 6 a) ATT Push the joystick to select On, then press the button. Repeat steps 5 and 6 a) to attenuate other channels. b)VOL Push the joystick or to adjust the volume level of the channel over a range of -7 to +7, then press the button. Repeat steps 5 and 6b) to adjust the volume level of the other channels. c) AFT Push the joystick or to fine tune the channel frequency over a range of -15 to +15, then press the button. Repeat steps 5 and 6c) if you wish to fine tune other channels. d)DECODER Push the joystick or to select AV1 (for a decoder connected to the Scart :1/ 1) or AV3 (for a decoder connected to the Scart :3/q3 (SMARTLINK)), then press the button. Repeat steps 5 and 6d) to select the AV1 or AV3 output for other programme positions. The picture from the decoder connected to the Scart connector :1/ 1 or :3/q3 (SMARTLINK) on the back of the set will appear on the selected programme number. Picture Adjustment Select: Enter Menu: Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone Personal On Off Normal Set Up Auto Tuning.. Programme Sorting.. Select NexTView.. AV Preset.. Manual Set Up Select: Start Auto Tuning Start - - - - - - - Enter: Set Up Auto Tuning.. Programme Sorting.. Select NexTView.. AV Preset.. Manual Set Up Select: .... - - - - - - - Manual Set Up Select: Enter: Language/Country.. Manual Programme Preset.. Further Programme Preset.. RGB Set Up.. Personal ID.. Demo ....- - - - - - - Further Programme Preset Select: Enter: PROG AFTVOL ATT DECODER On.. On.. On Off.. Off.. Off 0.. 0.. 0 Off.. Off.. Off 1.. 2.. 3.. 4.. 5.. 6.. 7.. 8.. 9.. 10.. 11 .... PROG AFTVOL ATT DECODER 1 Off.. On .. PROG AFTVOL ATT DECODER 1 On -5 2.... PROG AFTVOLATT DECODER 1 On -5 2 Off AV1 AV3 .... PROG AFTVOL ATT DECODER 1 On - 5.... 7 Press the button to exit and return to the normal TV screen. The TV set is now ready for use. Menu System Menu System Inputting Your Personal ID You can programme this TV set with a personal code, using up to eleven characters (letters and numbers). By using this function it will be possible to identify your TV set if it is ever stolen. This code can only be input once! Make sure you make a note of it in this instruction manual. 1 Press the button on the remote control to display the menu on the screen. 2 Push the joystick to select the symbol, then push to enter the Set Up menu. 5 Push the joystick to or to select a letter, number, + or a blank; then push to confirm this character. Select the other ten characters in the same way. 3 Push the joystick or to select Manual Set Up, then push to enter. Picture Adjustment Select: Enter Menu: Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour Tone Personal On Off Normal Set Up Auto Tuning.. Programme Sorting.. Select NexTView.. AV Preset.. Manual Set Up Select: Start Auto Tuning Start - - - - - - - Enter: Set Up Auto Tuning.. Programme Sorting.. Select NexTView.. AV Preset.. Manual Set Up Select: .... - - - - - - - Manual Set Up Select: Enter: Language/Country.. Manual Programme Preset.. Further Programme Preset.. RGB Set Up.. Personal ID.... Demo ..- - - - - - - Manual Set Up Select A-Z, 0-9: Store: OK Language/Country.. Manual Programme Preset.. Further Programme Preset.. RGB Set Up.. Personal ID.. Demo A---------- Are you sure? Save: OK Cancel: GB 4 Push or to select Personal ID, then push to enter. 6 After selecting all the characters, press the button. A new menu automatically appears on the screen asking you to be sure that you want to save this ID. 7 a) If you do not wish to store this ID, push the joystick and repeat steps 4 to 6 to enter a new ID. b) If you wish to store this ID, press the button. Remember that this code can only be input once. 8 Press the button to return to the normal TV screen. When you enter the Manual Set Up menu, in the "Personal ID" option the code you entered above will be displayed. You will not be able to select and change this option. Menu System Menu System Using the Demo Mode This function provides an overview of some of the features available on this TV set. 1 Press the button on the remote control to display the menu on the screen. 2 Push the joystick to select the symbol, then push to enter the Set Up menu. 3 Push the joystick or to select Manual Set Up, then push to enter. 4 Push or to select Demo, then push to enter and start the demonstration. The TV set starts the demonstration and shows most of the available picture functions. Note: Press the button on the remote control to stop the demonstration and return to the normal T...

Baixe o seu

Para fazer o download, introduza 2 dígitos :