Assessments - , GPA:
(
)
)
Fabricante : Sony
Arquivo Tamanho: 5.77 mb
Arquivo Nome :
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
Facilidade de uso
Optional accessories Wall-Mount Bracket SU-WL100 Dimensions (Approx.) (w . h . d) with Table-Top Stand 58.6 x 39.8 x 15.6 cm without Table-Top Stand 58.6 x 37.8 x 9.0 cm Mass (Approx.) with Table-Top Stand 7.0 kg without Table-Top Stand 6.5 kg *Specified standby power is reached after the TV finishes necessary internal processes. Design and specifications are subject to change without notice. PC input signal reference chart for PC and HDMI IN 1, 2, 3, 4 Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Standard Signals Horizontal (Pixel) . Vertical (Line) VGA 640 . 480 31.5 60 VESA 640 . 480 37.5 75 VESA 720 . 400 31.5 70 VESA SVGA 800 . 600 37.9 60 VESA 800 . 600 46.9 75 VESA XGA 1024 . 768 48.4 60 VESA 1024 . 768 56.5 70 VESA 1024 . 768 60.0 75 VESA WXGA 1280 . 720 45.0 60 EIA 1280 . 768 47.4 60 VESA 1280 . 768 47.8 60 VESA 1360 . 768 47.7 60 VESA ~ • This TV’s PC input does not support Sync on Green or Composite Sync. • This TV’s PC input does not support interlaced signals. • For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical frequency (boldfaced). 44 GB Troubleshooting Troubleshooting When the 1 (standby) indicator is flashing The self-diagnosis function is activated. 1 Count how many times the 1 (standby) indicator flashes between each two second break. For example, the indicator may flash three times, go off for two seconds, then flash again three times. 2 Press 1 on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes). When the 1 (standby) indicator is not flashing 1 Check the items in the tables below. 2 If the problem persists, have your TV serviced by qualified service personnel. Condition Explanation/Solution Picture There is no picture (screen is • Check the aerial/antenna/cable connection. dark) and no sound. • Connect the TV to the mains/AC power, and press 1 on the TV. • If the 1 (standby) indicator lights up in red, press "/1. No picture or menu • Press to display the list of inputs, then select the desired input. information from equipment • Check the connection between the optional equipment and the TV. connected to the scart connector appears on the screen. Ghosting occurs, or double • Check the aerial/antenna/cable connection. images appear. • Check the aerial/antenna location and direction. Only snow and noise appear • Check if the aerial/antenna is broken or bent. on the screen. • Check if the aerial/antenna has reached the end of its serviceable life (three to five years for normal use, one to two years when used at the seaside). There is picture or sound noise • Adjust “AFT” (Automatic Fine Tuning) to obtain better picture when viewing a TV channel. reception (page 38). Tiny black points and/or • The screen is composed of pixels. Tiny black points and/or bright points bright points appear on the (pixels) on the screen do not indicate a malfunction. screen. The picture contours are • Select “Standard” or “Off” in “Motionflow” (page 30). distorted. • Change the current setting of “Film Mode” to other settings (page 31). The picture is not displayed in • Select “Reset” (page 30). colour. The picture from equipment • Check the connection of the COMPONENT IN sockets and check if connected to the the sockets are firmly seated in their respective sockets. COMPONENT IN sockets is not displayed in colour, or is displayed in irregular colours. Additional Information 45 GB (Continued) Condition Explanation/Solution Condition Explanation/Solution • Turn the connected equipment on. • Check the cable connection. • Press to display the list of inputs, then select the desired input. • Correctly insert the memory card or other storage device in the digital still camera. • Use a digital still camera memory card or other storage device that has been formatted according to the instruction manual supplied with the digital still camera. • Operations are not guaranteed for all USB devices. Also, operations differ depending on the features of the USB device and the video being played. You cannot select the • Check the cable connection. connected equipment on the • Set the server to be displayed on the Home Menu (page 27). Home Menu or you cannot switch the input. Sound The picture is good, but there • Press 2 +/– or % (Mute). is no sound. • Check if the “Speaker” is set to “TV Speaker” (page 34). • When using HDMI input with Super Audio CD or DVD-Audio, DIGITAL AUDIO OUT (OPTICAL) may not output audio signals. Channels You cannot select your • Switch between digital and analogue mode, and select the desired desired channel. digital/analogue channel. Some channels are blank. • The channel is for scrambled/subscription service only. Subscribe to a pay TV service. • The channel is used only for data (no picture or sound). • Contact the broadcaster for transmission details. You cannot view digital channels. • Contact a local installer to find out if di...
Este manual também é adequado para os modelos :TV - KDL-22E5300 (5.77 mb)
- ()
- ()