Assessments - 4, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
TV - KDL-46W5820 (11.98 mb)
TV - KDL-46W5820 (12.52 mb)
Facilidade de uso
• Check that the server is correctly configured. • Check that the selected device is connected to the network and can be accessed. • If the “IP Address Settings” in “Network” under “Network Settings” is set to “DHCP (DNS automatic)” or “DHCP (DNS manual)”, it may take some time to recognise devices if there is no DHCP server. Execute “Server Diagnostics” (64). The TV cannot be found from renderer- compatible device (the controller). Check Connections • Check that the LAN cable and/or mains lead of the server has not become disconnected. Check Settings • Check if the “Renderer Function” is activated (108). 116/119 Troubleshooting • Check that the connected device is registered under “Renderer Access Control” (108). Only a few icons appear under the “Network“ in the Home Menu. • This is normal when internet connection is not available. You can use three pre-installed Widgets properly. To enjoy more Widgets, please check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*) You have been using registered Widgets, but now some contents won't appear on the Widgets. • Check that the LAN cable and/or mains lead/ AC power cord of the router/modem has not become disconnected. (*) • There's a possibility that the Widget Provider's server is out of service. Please try using the Widget later. (*) Your router/modem must be properly set to connect to the internet in advance. Please contact your Internet Service Provider for the router/modem settings. 117/119 Troubleshooting General Some programmes cannot be tuned. • Check the aerial or dish. • The satellite cable might be short-circuited or there might be connection problems of the cable. Please check the cable and connection and then turn the TV Off with the Mains power On/Off switch, and turn it On again. • The frequency you entered is out of range. Please consult the received satellite broadcasting company. Distorted picture and/or sound. • Keep the TV away from electrical noise sources such as cars, motorcycles, hair-dryers or optical equipment. • When installing optional equipment, leave some space between the optional equipment and the TV. • Check the aerial/cable connection. • Keep the aerial/cable TV cable away from other connecting cables. The TV turns off automatically (the TV enters standby mode). • Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of “On Timer” (71). • Check if the “Idle TV Standby” is activated (72). 118/119 Troubleshooting • If no signal is received and no operation is performed in the TV mode for 30 minutes, the TV automatically switches to standby mode. The TV turns on automatically. • Check if the “On Timer” is activated (71). Some input sources cannot be selected. • Select “AV Preset” and cancel the “Skip” setting for the input source (91). The remote does not function. • Replace the batteries. HDMI equipment does not appear on “HDMI Device Li...
Este manual também é adequado para os modelos :TV - KDL-46V5800 (11.97 mb)
TV - KDL-46V5810 (11.97 mb)
TV - KDL-52V5800 (11.97 mb)
TV - KDL-52V5810 (11.97 mb)