CAUTION • Avoid touching the screen at all times, as this may result in damage to the screen. • It is recommended to move the TV in the box or packing material that the TV originally came in. • Before moving or lifting the TV, disconnect the power cord and all cables. • When holding the TV, the screen should face away from you to avoid damage. • When transporting a large TV, there should be at least 2 people. • When transporting the TV by hand, hold the TV as shown in the following illustration. • When transporting the TV, do not expose the TV to jolts or excessive vibration. • When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. • Do not apply excessive pressure to cause flexing/bending of frame chassis as it may damage screen. • Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. 17 ENGENGLISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. -Leave a 10 cm (minimum) space from the wall for proper ventilation. 2 Connect the power cord to a wall outlet. CAUTION yDo not place the TV near or on sources of heat, as this may result in fire or other damage. Using the Kensington security system (This feature is not available for all models.) Image shown may differ from your TV.The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit Connect the Kensington security system cable between the TV and a table. 10 cm 10 cm 10 cm 10 cm Adjusting the angle of the TV to suit view (Only LA643*/LA61**) Swivel 15 degrees to the left or right and adjust the angle of the TV to suit your view. 1515 CAUTION yWhen adjusting the angle adof the product, watch out for your fingers. y»Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. ENGENGLISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. -Leave a 10 cm (minimum) space from the wall for proper ventilation. 2 Connect the power cord to a wall outlet. CAUTION yDo not place the TV near or on sources of heat, as this may result in fire or other damage. Using the Kensington security system (This feature is not available for all models.) Image shown may differ from your TV.The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit Connect the Kensington security system cable between the TV and a table. 10 cm 10 cm 10 cm 10 cm Adjusting the angle of the TV to suit view (Only LA643*/LA61**) Swivel 15 degrees to the left or right and adjust the angle of the TV to suit your view. 1515 CAUTION yWhen adjusting the angle adof the product, watch out for your fingers. y»Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. 18 ASSEMBLING AND PREPARING ENGLISH Securing the TV to a table Fix the TV to a table to prevent from tilting forward, damage, and potential injury. To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand. (Only LN54/53**) (Only 32/42/47LA643*, 32/42/47LA61**) .2EA 2EA P4 x 8 (Only 47LA643*, 47LA61**) M4 x 8 (Only 32/42LA643*, 32/42LA61**) CAUTION (Only 32/42/47LA643*, 32/42/47LA61**) How to fix the TV to a table 1.Connect the Desk-mount Cables to the Stand Base using the Bracket Screws. 2.Fix the Desk-mount Cables to a table using the Desk-mount Screws. 3. Once the TV is fixed, move the table close to the wall. Children may go in, causing injuries. WARNING • To prevent TV from falling over, the TV should be securely attached to the floor/ wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. Securing the TV to a wall (This feature is not available for all models.) 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. -If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. CAUTION • Make sure that children do not climb on or hang on the TV. NOTE • Use a platform or cabinet that is strong and large enough to support the TV securely. • Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer. 19 ENEGNLGISH ASSEMBLING AND PREPARING Mounting on a wall Attach an optional wall mount bracket at the ...
