Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
NOTE yyThe external device connection may differ from the model. yyConnect external devices to the TV regardless of the order of the TV port. yyIf you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information on recording, refer to the manual provided with the connected device. yyRefer to the external equipment’s manual for operating instructions. yyIf you connect a gaming device to the TV, use the cable supplied with the gaming device. yyIn PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. yyIn PC mode, some resolution settings may not work properly depending on the graphics card. (Only 22/26LT64**, 26LT66**, 22/26LT38**) DC IN DC Adapter 1 Connect the antenna cable to the antenna input port on the TV. 2 Connect the DC adapter plug to the power input jack on the TV. 3 Connect the power cord to the DC adapter first, then plug the power cord into the wall power outlet. Antenna connection Connect the TV to a wall antenna socket with an RF cable (75 .). NOTE yyUse a signal splitter to use more than 2 TVs. yyIf the image quality is poor, install a signal amplifier properly to improve the image quality. yyIf the image quality is poor with an antenna connected, try to realign the antenna in the correct direction. yyAn antenna cable and converter are not supplied. yySupported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus, HE-AAC ANTENNAINANTENNA CABLEINANTENNAIN MAKING CONNECTIONS 17 ENG ENGLISH (Only 26/32/37/42/47LT76**) HDMI connection Transmits the digital video and audio signals from your PC to the TV. Connect the PC and the TV with the HDMI cable as shown in the following illustrations. Choose any HDMI input port to connect. It does not matter which port you use. NOTE yyIt is recommended to use the TV with the HDMI connection for the best image quality. yyUse the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function. yyHigh Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. yySupported HDMI Audio format : Dolby Digital, PCM (Up to 192 KHz, 32KHz/44.1K Hz/48KHz/88KHz/96KHz/176KHz/192KHz, DTS Not supported.) ARC (Audio Return Channel) yyAn external audio device that supports SIMPLINK and ARC must be connected using HDMI/DVI IN 1 (ARC) port. yyWhen connected with a high-speed HDMI cable, the external audio device that supports ARC outputs optical SPDIF without additional optical audio cable and supports the SIMPLINK function. HDMI1233 Component connection (Only LT64**, LT66**, LT38**, LT74**) Transmits the analogue video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown in the following illustrations. DVD/ Blu-Ray / HD Cable Box / HD STB / PC VIDEOAUDIO (*Not Provided) (*Not Provided) RED WHITE RED GREEN BLUE DVD/ Blu-Ray / HD Cable Box (Only LT769*) (*Not Provided) 8 ) SPEAKEROUTAV1(AUDIOLRVIDEODVD/ Blu-Ray / HD Cable Box REDWHITEBLUEGREEN(*Not Provided) GREENREDREDBLUEBLUEREDGREEN NOTE yyIf cables are not installed correctly, it could cause this image to display in black and white or with distorted colours. DVI to HDMI connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustrations. To transmit an audio signal, connect an audio cable. Choose any HDMI input port to connect. It does not matter which port you use. SPEAKEROUT2DVI OUTAUDIO OUT(RGB/DVI) AUDIOIN121233DVD/ Blu-Ray / HD Cable Box / PC(*Not Provided) NOTE yyDepending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. RGB-PC connection (Only LT64**, LT66**, LT38**, LT74**, LT760*) Transmits the video signal from PC to the TV. To transmit an audio signal, connect an audio cable. RGB OUT (PC)AUDIO OUTAUDIO IN(RGB/DVI) RGB IN (PC) PC(*Not Provided) Network Setup (Only LT74**, LT76**) Wired Network Connection This TV can be connected to a local area network (LAN) via the LAN port. After making the physical connection, the TV needs to be set up for network communication. (Image shown may differ from your TV.) LAN21 Broadband Modem Headphone connection (Only LT64**, LT66**, LT38**, LT74**, LT769*) Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown. (*Not Provided) NOTE yyAUDIO menu items are disabled when connecting a headphone. yyWhen changing AV MODE with a headphone connected, the change is applied to video but not to audio. yyOptical Digital Audio Out is not available when connecting a headphone. yyHeadphone impedance: 16 . yyMax audio output of headphone: 9 mW to 15 m...
Este manual também é adequado para os modelos :TV - 32LT760H (7.03 mb)
TV - 42LT760H (7.03 mb)