Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
For more information about connecting a converter/descrambler box, contact your cable TV provider. To connect cable TV without a converter/descrambler box: 1 Connect one end of a 75 ohm cable to the coaxial jack on the back of your TV. 2 Connect the other end of the cable to the cable TV wall outlet. To connect cable TV with a converter/descrambler box: • Use the following illustration to connect a converter/descrambler box. (The RF switch and the signal splitter are not provided.) Set the RF switch to the A position to tune to unscrambled channels using your TV remote control. Set the RF switch to the B position to watch scrambled channels using the converter/descrambler controls. Connecting to an external signal source You can connect a DVD, VCD, VCR, or STB using a variety of methods, including composite cables, component cables, an S-Video cable, or an HDMI cable. The S-Video cable does not carry sound. If you use an S-Video cable, you need to use audio cables to connect the audio output. Warning: Make sure that you turn off and unplug your TV before connecting devices. Note: For better video, use the S-Video jack if your device has an S-Video connection. For best video, use the HDMI jack if your device has an HDMI connection. To connect an external signal source: 1 For composite video—Plug the audio/video cable into the AUDIO L, AUDIO R (6), and VIDEO (2) jacks on the back of your TV, then connect the other ends to the corresponding jacks on the external signal source. Or For S-Video—Plug in the audio cables as described above, then plug one end of an S-Video cable into the S-Video (3) jack on the back of your TV, then plug the other end into the S-Video jack on the external signal source. Or For component video—Plug the Y, Pb, and Pr video cables into the COMPONENT (5) jacks and the Audio L and Audio R cables into the AUDIO L and AUDIO R (4) jacks on the back of your TV, then plug the other ends of the cables into the corresponding jacks on the external signal source. Or For HDMI—Plug one end of an HDMI cable into the HDMI1 (1) jack on the back of your TV, then plug the other end into an HDMI device. 75 ohm cable 300 ohm cable RF switch Cable converter/descrambler box Two-set signal splitter Out In A B TV 1 VGA AUDIO SPDIF AV IN PC IN Pr Pb 2 3 5 4 6 ANTENNA / CABLE DIGITAL / ANALOG Using your TV 2 Turn on your TV. 3 Press INPUT repeatedly to select the external signal source you want to watch. 4 Turn on external signal source. 5 Insert a disc or videotape into the external signal source, then press PLAY. Connecting a computer You can connect a computer using the HDMI or VGA jack on the back of your TV. Warning: Make sure that you turn off and unplug your TV before installing devices. Note: When the computer goes into standby mode, your TV turns off. If your TV does not turn on when you “wake” your computer, press the POWER button on your TV or remote control. To connect a computer using VGA: 1 Plug a VGA cable from your computer into the VGA jack on the back of your TV. VGA AUDIO PC IN VGA cable Audio cable 2 Plug an audio cable from your computer’s audio out jack into the AUDIO jack on the back of your TV. 3 Plug in and turn on your TV. 4 Press INPUT repeatedly to select the VGA input source. To connect a computer using HDMI: • Plug an HDMI cable into the HDMI INPUT jack on the back of your TV and into the HDMI Out jack on the back of the computer. Using your TV Turning your TV on and off To turn your TV on and off: 1 Make sure that the power cord is connected to your TV and a power outlet. 2 Press to turn on your TV. The power indicator LED turns blue. 3 Press again to return your TV to standby. The power indicator LED turns red. Selecting the TV signal source To select the TV signal source: • With the TV on, press INPUT on either the TV or the remote to choose from: •TV •Composite •S-Video • Component •VGA • HDMI Press VIDEO to choose between Composite and S-Video. Note: HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Setting up the channel list After you select your TV source, if you selected antenna or cable you need to set up the channel list. When you set up your channel list, your TV searches for all available channels in your area and stores a list of these channels. When you press CH – or CH +, your TV skips the channels that do not have a signal. Automatically setting up channels To automatically set up the channel list: 1 Press MENU. The on-screen display menu opens with Setup highlighted. ENTER 2 Press to enter the sub-menu, then press or to highlight Auto Ch Search. 3 Press ENTER or to start the search. Note: You can press Exit to stop the search. Manually adding or deleting channels from the channel list After you create a channel list using the Auto Ch Search option, you can manually add or delete channels from the channel list. To add or delete channels: 1 Press MENU. The on-screen display menu opens with Se...