Assessments - 2, GPA: 4.5
(
)
)
|
Fotos e especificações Sanyo PLC-XP57L |
Facilidade de uso
2 2 Press the POINT UP/DOWN buttons to move the red frame pointer to the desired level and then press the SELECT button. IMAGE SELECT Menu icon Move the red frame pointer to a level and press the SELECT button. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1–10 User preset picture adjustment in the IMAGE ADJUST Menu. (pp.35–37) COMPUTER INPUT PICTURE SCREEN ADJUSTMENT PICTURE SCREEN SELECT This projector has a picture screen resize function, which enables you to display the desirable image size. 1 1 Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the SCREEN Menu icon. 2 2 Press the POINT UP/DOWN buttons and move the red frame pointer to the desired function and then press the SELECT button. Normal Provides the image to fit the screen size. True Provides image in its original size. Wide Provides the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used to provide the squeezed video signal at 16:9. Full Provides the full screen image. Digital zoom + When the Digital zoom + is selected, the On-Screen Menu disappears and “D. Zoom +” appears. Press the SELECT button to expand the image size. Press the POINT UP/DOWN/LEFT/RIGHT buttons to pan the image. The Panning function can work only when the image is larger than the screen size. The projected image can be also expanded by pressing the D.ZOOM ^ button on the remote control. Digital zoom – When the Digital zoom – is selected, the On-Screen Menu disappears and “D. Zoom –” appears. Press the SELECT button to compress the image size. The projected image can be also compressed by pressing the D.ZOOM Ў button on the remote control. To cancel the Digital Zoom +/– mode, press any button except D.ZOOM ^/Ў, SELECT, POINT, and LASER buttons. SCREEN MENU SCREEN Menu icon Move the red frame pointer to a function and press the SELECT button. NOTE: • True, Full, and Digital zoom +/– cannot be operated when “480i,” “575i,” “480p,” or “575p” is selected on the PC SYSTEM Menu. (p.25) • The Screen Menu cannot be operated when “720p (HDTV),” “1035i (HDTV),” or “1080i (HDTV)” is selected on the PC SYSTEM Menu. (p.25) • This projector cannot display any resolution higher than 1600 x 1200. If your computer’s screen resolution is higher than 1600 x 1200, lower the resolution before connecting the projector. • The image data other than XGA (1024 x 768) is modified to fit the screen size in initial mode. • The Panning function may not operate properly if the computer system prepared on the PC ADJUST Menu is used. VIDEO INPUT SELECTING INPUT SOURCE DIRECT OPERATION INPUT button Select an INPUT source by pressing the INPUT button on the top control or the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control. If the projector cannot reproduce proper image, select a correct input source with the MENU OPERATION (see below). Input 1 Input 2 Input 3 .Input 1 is not displayed when the Input 1 is used as Monitor out. MENU OPERATION WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS ) When connecting to video equipment, select a type of Video INPUT MENU 1 1 source in the Source Select Menu. Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the INPUT Menu icon. 2 2 Press the POINT UP/DOWN buttons to move the red arrow pointer to Input 2 and then press the SELECT button. A Source Select Menu appears. 3 3 Move the pointer to a source that you want to select and then press the SELECT button. When the video input signal is connected to the Video VIDEO jack, select Video. When the video input signal is connected to the Y Y, Pb/Cb, Pr/Cr Pb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. NOTE: • INPUT SOURCE changes if the INPUT 2 button on the remote control is pressed. INPUT Menu icon Move the pointer (red arrow) to Input 2 and press the SELECT button. Input 2 Move the pointer (red arrow) to Video or Y, Pb/Cb, Pr/Cr and press the SELECT button. Source Select Menu WHEN SELECTING INPUT 3 (AV TERMINALS ) When connecting to video equipment, select a type of Video INPUT MENU 1 1 source in the Source Select (Video) Menu. Press the MENU button to display the On-Screen Menu. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the INPUT Menu icon. 2 2 Press the POINT UP/DOWN buttons to move the red arrow pointer to Input 3 and then press the SELECT button. A Source Select Menu appears. 3 3 Move the pointer to a source that you want to select and then press the SELECT button. INPUT Menu icon Move the pointer (red arrow) to Input 3 and press the SELECT button. Input 3 Move the pointer (red arrow) to a source and press the SELECT button. Source Select Menu When the video input signal is connected to the VIDEO jack, select Video. When the video input signal is connected to the Y- Pb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr. When the video ...