Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
Miraloma Ave. Anaheim, CA 92806 Phone: 800 368-9700 Fax: 800 832-4888 VISIT US AT WWW.MOUNTS.COM Introduction Plasma display manufacturers are constantly improving their products and introducing new ones. We are committed to keeping up with them. That's why we maintain close relationships with all major OEMs - to ensure that we have the latest information on new display products coming to market. Our mounts are often available before the corresponding displays are even on sale. Mounts are available in either flat or tilt versions, this versatile mount can be used for just about any application, including walls, stands, carts, ceilings - even inside custom cabinets and other furniture applications. Contents NOTE:| The fol l owing installation procedures indicate a wall structure installation. For installations other than wall mounting refer to installation instructions. o Safety & precautions o Mount diagrams o Parts List o Optional Adapters o Installing the mounting bracket o Installing the mount o Electrical o Securing the mount o Additional security NOTE:| For installations other than wall mounting please refer to page 6. If installing the plasma display to the ceiling or floor stand please refer to its installation instructions. o Ceiling structure assembly drawing (pg 6) 2 Thank you for choosing PREMIER MOUNTS for your installation needs. If you have any questions please contact PREMIER MOUNTS Information is shown on the front of this page. Safety & Precautions W/JHNNM Safety precaution measures must be practiced at all times during the installation of this product. Use proper safety gear and tools for the installations procedure to prevent personal injury or damage to the plasma displays or plasma mounts. WARNINGI Indicates that the power plug is to be disconnected from the power outlet. Safety precautions must be taken at all times. Warning and caution in general Contact Premier Mounts for any questions A secured structure wooden stud wall must always support the weight or load of the plasma. Always confirm the center of the wood stud before beginning the installation. Do not install in locations where there is vibration, movement or danger of impact. Failure to do so could result in plasma cracking or falling from the wall causing damage and injury. Do not install near heater, fireplace, direct sunlight or air conditioning or any other source of direct heat energy. Failure to do so may result in damage to the plasma television and could cause a risk of fire. (T) At least two qualified people should always perform the installation work. Injury and damage can result from dropping or mishandling the plasma television. Mounting structure recommended wood studs, solid-flat concrete, and reinforced metal studs. If installing the mount on other than wood studs use (commercially available) suitable hardware. 3 Mount Diagrams Our PSM flat / tilt mounts are designed for wall or ceiling mounting, or it can mate with any of our popular carts, floor stands or wall arms. The ultra slim plasma mount stands off the wall just enough for proper, OEM-specified ventilation, yet keeps the plasma close enough for a clean, seamless look. It allows either vertical (portrait) or horizontal (landscape) display configuration. UNIVERSAL FLAT MOUNT PART#: PDB-UWFB MATERIAL: 12 (GA) CRS COLOR: Black powder coat Lag bolt access slot. B. Mounting points (4.5”) used on installations other than wall mounting. C. Access hole for power or cables. D. M6 security screw mounting points used on installations other than flat wall mounting. UNIVERSAL TILT MOUNT PART#: PSB-TBP MATERIAL: 12 (GA) P & O COLOR: Black powder coat Lag bolt access slot. E. Worm drive F. Locking pins G. Access hole for power or cables. H. Mounting points (4.5”) used on installations other than wall mounting. 0.500 1.528 1.528 PSM SERIES MOUNT PART#: PDB-442 MATERIAL: 12 (GA) P & O COLOR: Black Powder coat Note: The PDB-Series bracket mates to the universal PDB-UWFB flat mount and the universal PSB-TBP tilt mount. -27.000- -24.721- -7.125- -13.250- i. 125— -27.000- 14. 4 Parts List Standard hardware QTY SIZE DESCRIPTION 6 (Tilt) - 4 (Flat) 5/16” Dia Lag bolts 1 ■ PSM series mount 1 ■ Flat / Tilt mount 2 M6 x 12 (mm) Phillip security screws Used for additional security on tilt mounts, mobile carts, floor stands and ceiling mounts 1 ■ Installations instructions 1 ■ Bubble level PSM-Mount PSM-313 PSM-375 PSM-401 PSM-402 PSM-410 PSM-421 PSM-423 PSM-424 PSM-425 PSM-426 PSM-427 PSM-428 PSM-432 PSM-460 PSM-478 PSM-499 PSM-500 PSM-501 PSM-502 PSM-532 PSM-540 PSM-542 PSM-550 PSM-570 PSM-610 PSM-615 PSM-783 PSM-442 PSM-Series Mounting hardware QTY SIZE DESCRIPTION 6 M5 x 16 Phill p screws 4 M6 x 12 Phill p screws 6 M8 x 20 Phill p screws / Flat washers / Split washers 8 M6 x 12 Phill p screws 6 M5 x 16 Phill p screws / Flat washers / Spli...