Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
The manufacturer’s warranty does not cover user abuse or improper installations. Attaching the Base IMPORTANT: The Base of the HDTV must be assembled prior to usage. 1. Place TV unit face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the HDTV. 2. Carefully align and insert the Base to the stand. 3. Gently push the Base towards the HDTV until the locking mechanism locks into place. 8 Preparing Your LCD HDTV for Wall Mounting We suggest that you keep your TV at least 2.36 inches (60 mm) from the wall to prevent cable interference. Before mounting your TV on the wall, you need to remove the base. To attach a wall mount bracket to your TV: 1 Remove the screws holding your TV to the stand. 2 Remove the stand base. 3 Secure the wall mount bracket to the back of your TV using four M4 screws, as indicated in the illustration. Note: 100mmx100mm wall mount bracket & M4 screws not included. 9 PREPARATION PREPARATION Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! 1. Install the base stand; place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing. 2. Connect the antenna cable or CATV cable to the aerial socket ANT IN 75. at the back of the TV set. 10 3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). 4. Power: Insert the power cord in the wall socket having an AC power supply. You can see LED states at the front panel. If the LED color is Blue, means the TV set is power on. If the LED color is Red, which means this TV set is in standby state. 5. Turn the TV on: Push the POWER key on the Remote control or the Front panel control knobs. Wait a minute, the TV will power on and can see the display on the screen POWER Key 11 12 HDMI S-Video Composite Pr Pb Y PC Line in 15-pin D-Sub PERIPHERAL CONNECTION GUIDE AC POWER L 1. HDMI – Connect the primary source for digital video such as a DVD multimedia player or set top box through this all digital connector. The white color band on the rear of the TV indicates this connection. 2. RGB PC – Connect the video and audio cables from a computer here. 3. AV/S-VIDEO IN – Connect the primary source for composite video devices, such as a VCR or video game. Use the white and red connectors to connect the external audio from the same source. The signal being carried by the S-Video cable and connector, if connected, will take priority over the Video RCA connector (yellow connector). 4. COMPONENT (YPb/CbPr/Cr with Audio L/R) – Connect the primary source for component video devices such as a DVD Player or set top box here. From left to right, use red for Pr, blue for Pb, green for Y, red for right audio (R) and white for left audio (L) inputs. 5. DTV – Connect to an antenna or digital cable (out-of-the-wall, not from Cable Box) for Digital TV.* 6. SPDIF (Optical Digital Audio Out) - When a digital audio signal is associated with the input selected for viewing, the digital audio will be available on this SPDIF connection to your home theater system. Once your equipment is connected, use the following procedure to view the input signal: Press the source button on the remote controller to select the relevant source to view. (ex: Press VIDEO button to select “Composite Rear” if you have connected a video recorder to Composite Rear socket.) 13 TO USE THE FRONT PANEL CONTROL OPERATION INSTRUCTIONS TO USE THE FRONT PANEL CONTROL OPERATION INSTRUCTIONS 1 VOL + VOL +: Press to increase the sound volume level. 2 VOL VOL - : Press to decrease the sound volume level. 3 CH ^ CH +: Press to select the next higher Program number. 4 CH Ў CH - : Press to select the next lower Program number. 5 MENU Menu key: Press to open or exit the OSD menu. 6 INPUT Source key: Press to select the input source. 7 POWER Power key: Press to turn on / off (standby) the TV set. (Please re-turn on TV after the Power-ON status LED had changed to the Red color and finished flashing.) 14 TO USE THE REMOTE CONTROL TO USE THE REMOTE CONTROL POWER Press to power ON/OFF (standby) TV.(Note:1.TV is never completely power off. unless physically unplugged. 2.Press to turn on TV after the power on status LED had changed to the red color and stopped flashing. ) VIDEO Press repeatedly to choose S- Video/ Composite source mode (Video 1 ~ 2) COMP Press repeatedly to choose Component source mode (Video 3 ). PC/HDMI Press repeatedly to choose VGA or HDMI source mode (Video 4 ~ 6). TV Press to choose ATSC/NTSC TV source mode. 0 ~ 9 /- number Press to enter TV channel number to select channel (Press ‘-’ to indicate choosing the sub-channel). SLE...