Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
Protective Grounding Terminal This symbol indicates a terminal that must be connected to earth ground prior to making any other connections to the equipment. Life-Support Policy As a general policy, Server Technology does not recommend the use of any of its products in the following situations: • life-support applications where failure or malfunction of the Server Technology product can be reasonably expected to cause failure of the life-support device or to significantly affect its safety or effectiveness. • direct patient care. Server Technology will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Server Technology that: • the risks of injury or damage have been minimized, • the customer assumes all such risks, and • the liability of Server Technology is adequately protected under the circumstances. The term life-support device includes but is not limited to neonatal oxygen analyzers, nerve stimulators (whether used for anesthesia, pain relief or other purposes), auto-transfusion devices, blood pumps, defibrillators, arrhythmia detectors and alarms, pacemakers, hemodialysis systems, peritoneal dialysis systems, neonatal ventilator incubators, ventilators (for adults or infants), anesthesia ventilators, infusion pumps, and any other devices designated as “critical” by the U.S. FDA. Compliance Units have been safety tested/certified to the following standards: USA and Canada to UL 60950:2000 and CAN/CSA 22.2 No. 60950-00, European Union to EN60950:2000 USA Notification Warning: Changes or modifications to these units not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment under FCC rules. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment is a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Canadian Notification This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le present appareil numerique n’emet pas de bruits radioelectriques depassant les limites applicables aux appareils numeriques de la classe A prescrites dans le Reglement sur le brouillage radioelectrique edicte par le Ministere des Communications du Canada. Japanese Notification Table of Contents CHAPTER 1: INTRODUCTION 1 Features and Benefits.......................................................................................................................2 Technical Support............................................................................................................................3 Quick Start Guide.............................................................................................................................3 CHAPTER 2: INSTALLATION 5 Standard Accessories........................................................................................................................6 Additional Required Items...............................................................................................................6 Equipment Overview........................................................................................................................6 Safety Precautions............................................................................................................................7 Installing the Power Input Retention Bracket...................................................................................7 Mounting..........................................................................................................................................7 Connecting to the Power Source......................................................................................................8 Connecting Devices..........................................................................................................................8 Connecting to the Commander.........................................................................................................8 CHAPTER 3: OPERATIONS 9 Interfaces........................................................................................................................................10 HTML Interface.............................................................................................................................11 Command Line Int...