Assessments - 5, GPA: 3.8
(
)
)
|
Facilidade de uso
If you are unsure of any part of this installation, contact a professional installer for assistance. 2.The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced 3.Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious injury or death. ! . Warning Pyle Audio 1600 63rd st , Brooklyn, NY, 11204 (718)236-8000 Thankyou forchoosingourproductThank you for choosing our product This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children 1.Make sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of this installation, contact a professional installer for assistance. 2.The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced 3.Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious injury or death. ! . Warning Pyle Audio 1600 63rd st , Brooklyn, NY, 11204 (718)236-8000 -8 INSTALLATION GUIDE Item ItemItem No.: No.:No.: PSWLE54 PSWLE54PSWLE54 TV Size Range: 23"~ 46" Maximum Weight Capacity: 30kg/66lbs Locked by safety bolt on the bottom Balance adjust system is included pyleaudio. com CAUTION This product was designed to be installed on wood stud walls and solid concrete walls. Before installing make sure the supporting surface will support the combined load of the equipment and hardware. Never exceed the Maximum Load Capacity. This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. -2- -7- 2 ID Description 1 2 3 1 1 Left bracket Bubble level Safety bolt Qty 5 2 1 4 1 Hardware Kit: A-H I J K L M 3 1 Wall plate 1 2,3 Wall Wall 6 6 6 4 I J K L M Square washer Long bolt Wall anchor Long bolt washer Spacer B C 4 4 M4.16mm bolt M5.16mm bolt M6.16mm bolt M5.36mm bolt M6.36mm bolt M8.36mm bolt D 4 4 4 4 4 F G H ID Qty Description E 4 M8.16mm bolt A 4 M4.12mm bolt Right bracket 4 NOTE: Always use an assistant or mechanical lifting equipment to safely lift and position heavy equipment. Part 3-Mounting the flat panel screen Hook the top of brackets onto the top flange of wall plate(1). Then swing the screen down. Tighten the safety screw on each bracket to lock the screen into place. (2,3) (4) 4 5 -6- I M F-H brackets to screen with Center brackets vertically on back of screen. Select the medium(F or G) or large(H) screws. Attach brackets to screen using four selected screws,four square washers(I) and four spacers(M) at the top and bottom of each bracket. Tighten screws firmly. Do not overtighten. Part 2b-Attaching recessed back Square washer(I) Medium hole for M5 and M6 screws Large hole for M8 screws -3- 1a-Wood Stud Mounting . Use wall plate as a template, make sure it is level, and mark mounting holes along the center lines of the wood studs. Drill 3/16 ) ) . . ” ” (5mm)dia holes 2 (50mm) deep. Level wall plate and attach to wall with long bolts(J and washers(L . Tighten screws firmly Do not overtighten Part 2 50mm) ”( .3/16 (5mm) ” Wood stud J L Bubble level -5- . Brackets To ScreenWith Flat Back Center brackets vertically on back of screen. Select the small(A or B),medium (C or D) or large(E) screws. Attach brackets to screen using four selected screws and four square washers(I) at the top and bottomof each bracket. Tighten screws firmly. Do not overtighten Part 2a-Attaching Screen With A-E I Square washer(I) Small hole for M4 screws Medium hole for M5 and M6 screws Large hole for M8 screws -4- ConcreteWall Mounting . Level wall plate and use it as a template to mark holes. Drill 3/8 (10mm) dia. holes 2 (50mm) deep. Insert anchors(K) into holes and secure wall plate with long bolts(J) and washers(L). Tighten screws firmly. Do not overtighten ” ” Part 1b-Concrete Wall ConcreteWall 2 ( ” 50mm) .3/8 (10mm) ” Bubble level K J L ...