Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
See Figure 1. RECEIVER (TOP VIEW) FRONT FIGURE 1 2. Secure the brackets (not supplied with the WA503 kit) to the sides of the receiver with the screws removed in Step 1. See Figure 2. RECEIVER (TOP VIEW) / FRONT \ BRACKET BRACKET FIGURE 2 NOTE: There are four holes in each bracket. Use the rear holes if the receiver is to be recessed; use the front holes to mount it flush to the rack. WA503 Adapter & Cable Installation 1. Insert the WA503 adapters through the holes in each bracket, and secure them from each side, using the attaching hardware. See Figure 3. WA503 < ADAPTER RECEIVER (TOP VIEW) WA503 ADAPTER * ® ♦ ■ ■ ♦ FRONT ■ A FIGURE 3 t 2. Connect the supplied antenna cables to the receiver antenna inputs and WA503 adapters. See Figure 4. FIGURE 4 Screw the antennas into the bulkhead adaptors protruding through the front panel. See Figure 5. FIGURE 5 Insert the receiver into the equipment rack and secure the brackets to the rack with the supplied screws. See Figure 6. T EQUIPMENT RACK FIGURE 6 NOTE: For more information, call Shure Customer Service at 1-847-600-2000. ©2006, Shure Incorporated 27B8445 (Rev. 3) Printed U.S.A....