Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
. . . . . . . . . . . 3 TV buttons and functions. . . . . . . . 6Remote control buttons and functions . . . 8 Using the TV's menu. . . . . . . . . . . . 19Basic operation . . . . . . . . . . . . . . 19PICTURE SETTING menu . . . . . 20PICTURE FEATURES menu . . . 21SOUND SETTING menu . . . . . . 25 FEATURES menu . . . . . . . . . . . 26 INSTALL menu . . . . . . . . . . . . . . 29Additional preparation . . . . . . . . . . 35 Troubleshooting . . . . . . . . . . . . . . 37Specification . . . . . . . . . . . . . . . . . 40 INSTRUCTIONS GGT0020-001B-H 0803-CR-JMT © 2003 VICTOR COMPANY OF JAPAN, LIMITED Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the mains plug. Do not pull on the power cord. 3 Never block or cover the ventilation openings. Never install the TV where good ventilation is unattainable. When installing this TV, leave spaces for ventilation around the TV of more than the minimum distances as shown. 15 cm 10 cm 10 cm 15 cm 4 Do not allow objects or liquid into the cabinet openings. 5 In the event of a fault, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover. 6 The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never use rub it forcefully. Never use any cleaner or detergent on it. 7 If you are not going to use this TV for a long period of time, be sure to disconnect the AC plug from the AC socket. 8 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 3 Setting up your TV CAUTION • Turn off all the equipment including the TV before connecting anything. 1 Connecting the aerial and VCR • Aerial cable is not supplied. Use a good quality 75-ohm coaxial cable. • Read the manual that came with the VCR before connecting. If not connecting a VCR (see Fig. A): Connect an aerial cable to the aerial socket on this TV. If connecting a VCR (see Fig. B): 1 Connect the aerial cable to the aerial input socket on the VCR, and connect the VCR and TV with another aerial cable. 2 Connect the VCR’s VIDEO OUT (video output) jack and the TV’s VIDEO jack with a video cable. To connect a VCR to the TV with an SVIDEO cable: Connect the VCR’s S-VIDEO OUT (SVIDEO output) connector and TV’s S connector with an S-VIDEO cable A, instead of connecting with a video cable. 3 Connect the VCR’s VIDEO OUT (audio L/R output) jacks and the TV’s AUDIO jacks (L/MONO and R) with an audio cable. • If the VCR’s audio output is in mono, connect the VCR’s AUDIO OUT (audio output) jack and the TV’s AUDIO L/ MONO jack with an audio cable. R R L L/MONO AUDIO AUDIO R AUDIO L/MONO CR CB Y/VIDEO VIDEO VIDEO-2 VIDEO OVER S VIDEO-3/ COMPONENT VIDEO-1 OUTPUT R R L L/MONO AUDIO AUDIO R AUDIO L/MONO CR CB Y/VIDEO VIDEO VIDEO-2 VIDEO OVER S VIDEO-3/ COMPONENT VIDEO-1 OUTPUT A Back of the TV Fig. A Back of the TV Fig. B Setting up your TV 2 Connecting the power cord Connect the mains plug to the AC outlet. 3 Putting the batteries into theremote control Use two AA/R6 batteries. Insert the batteries from the - end, making sure the + and -polarities are correct. • Follow the warnings printed on the batteries. • If the remote control does not work properly, replace the batteries. • The batteries we supply are only for setting up and testing your TV. Please replace them as soon as necessary. 4 Making the initial settings When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. 1 Press the main power button on the TV. The TV is turned on, and the JVC logo appears. • If the POWER lamp on the TV lights red and does not change to green, your TV is in the standby mode. Press the POWER button on the remote control to turn the TV on. • If the JVC logo does not appear, your TV has already been turned before. In this case, use the “LANGUAGE” and “AUTO PROGRAM” functions to make the initial settings. For details, see “INSTALL menu” on page 29. 2 Press the MENU/OK button. The LANGUAGE menu appears. You can choose a language for the on-screen language. HV-34LH21 / HV-34LH51 / HV-34LH71 POWER lamp Main power button POWER HV-29WH21 / HV-29WH51 / HV-29WH71 / HV-29VH21 POWER POWER lamp Main power button 5 Setting up your TV 3 Press the 6 buttons to choose ENGLISH. Then press the MENU/ OK button. The AUTO PROGRAM function starts. The TV channels you receive are automatically stored in the PR (programme numbers) LIST. • To stop the AUTO PROGRAM fu...