Log:
Assessments - 0, GPA: 0 ( )

Instruções de Operação Panasonic, Modelo PVC2022

Fabricante : Panasonic
Arquivo Tamanho: 1.34 mb
Arquivo Nome :
Língua de Ensino: enes
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso


Important Safeguards and Precautions
READ AND RETAIN ALL SAFETY AND
OUTDOOR ANTENNA INSTALLATION
OPERATING INSTRUCTIONS. HEED ALL
1 SAFE ANTENNA AND CABLE CONNECTION
WARNINGS IN THE MANUAL AND ON UNIT
An outside antenna or cable system must be properly
grounded to provide some protection
INSTALLATION
against built up static charges
NEC - NATIONAL
ANTENNA LEAD
ELECTRICAL CODE
IN WIRE
1 POWER SOURCE CAUTION
and voltage. Section 810 of
ANTENNA
GROUND
DISCHARGE UNIT
CLAMP
(NEC SECTION 810-20)
Operate only from power source indicated on unit
the National Electrical Code,
GROUNDING
or in this manual. If uncertain, have your Electric
ANSI/NFPA 70 (in Canada,
CONDUCTORS
(NEC SECTION 810-21)
ELECTRIC
SERVICE
Utility Service Company or Video Products
part 1 of the Canadian
EQUIPMENT
GROUND CLAMPS
POWER SERVICE
Dealer verify your home power source.
Electrical Code) provides
GROUNDING
ELECTRODE SYSTEM
information regarding proper
(NEC ART 250, PART H)
2 POWER CORD PLUG
grounding of the mast and supporting structure, grounding
For safety, this unit has a polarized type plug
of the lead-in wire to an antenna discharge unit, size of
(one wide blade), or a three-wire grounding type
grounding conductors, location of antenna discharge unit,
plug. Always hold the plug firmly and make sure
connection to grounding electrodes, and requirements for
your hands are dry when plugging in or
the grounding electrode.
unplugging the AC power cord. Regularly remove
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE
dust, dirt, etc. on the plug.
POWER LINES OR CIRCUITS
POLARIZED PLUG CAUTION:
Locate an outside antenna system well away from power
The plug fits into outlet one way. If it cannot be fully
lines and electric light or power circuits so it will never
inserted, try reversing it. If it still will not fit, have an
touch these power sources should it ever fall. When
electrician install the proper wall outlet. Do not
installing antenna, absolutely never touch power lines,
tamper with the plug.
circuits or other power sources as this could be fatal.
GROUNDING PLUG CAUTION:
USING THE UNIT
The plug requires a three-hole grounding outlet.
If necessary, have an electrician install the proper
Before unit is brought out of storage or moved to a new
outlet. Do not tamper with the plug.
location, refer again to the INSTALLATION section of these
safeguards.
3 POWER CORD
1 KEEP UNIT WELL AWAY FROM WATER OR
To avoid unit malfunction, and to protect against
electrical shock, fire or personal injury:
MOISTURE, such as vases, sinks, tubs, etc.
-Keep power cord away from heating appliances
2 IF EXPOSED TO RAIN, MOISTURE, OR STRONG
and walking traffic. Do not rest heavy objects on,
IMPACT, unplug unit and have it inspected by a qualified
or roll such objects over the power cord.
service technician before use.
-Do not tamper with the cord in any way.
3 ELECTRICAL STORMS
-An extension cord should have the same type
During a lightning storm, or before leaving unit unused for
plug (polarized or grounding) and must be
extended periods of time, disconnect all equipment from
securely connected.
the power source as well as the antenna and cable system.
-Overloaded wall outlets or extension cords is a
4 WHEN UNIT IS PLUGGED IN
fire hazard.
• DO NOT OPERATE IF:
-Frayed cords, damaged plugs, and damaged or
- liquid has spilled into unit.
cracked wire insulation are hazardous and
- unit was dropped or otherwise damaged.
should be replaced by a qualified electrician.
- unit emits smoke, malodors, or noises.
4 DO NOT BLOCK VENTILATION HOLES
Immediately unplug unit, and have it inspected by a service
Ventilation openings in the cabinet release heat
technician to avoid potential fire and shock hazards.
generated during operation. If blocked, heat
• Never drop or push any object through openings in unit.
build-up may result in a fire hazard or heat
Touching internal parts may cause electric shock or fire hazard.
damage to cassettes.
• Keep magnetic objects, such as speakers, away from
For your protection:
unit to avoid electrical interference.
a. Never cover ventilation slots while unit is ON,
5 USING ACCESSORIES
or operate unit while placed on a bed, sofa,
Use only accessories recommended by the manufacturer
rug, or other soft surface.
to avoid risk of fire, shock, or other hazards.
b. Avoid built-in installation, such as a book case
6 CLEANING UNIT
or rack, unless properly ventilated.
Unplug unit. Use a clean, dry, chemically untreated cloth to gently
5 AVOID EXTREMELY HOT LOCATIONS OR
remove dust or debris. DO NOT USE cleaning fluids, aerosols, or
SUDDEN TEMPERATURE CHANGES
forced air that could over-spray, or seep into unit and cause
Do not place unit over or near a heater or
electrical shock. Any substance, such as wax, adhesive tape, etc.
regulator, in direct sunlight, etc. If unit is
may mar the cabinet surface. Exposure to greasy, humid, or
suddenly moved from a cold place to a warm
dusty areas may adversely affect internal parts.
SERVICE
place, moisture may condense in unit and on the
tape causing damage.
1 DO NOT SERVICE PRODUCT YOURSELF
6 TO AVOID PERSONAL INJURY
If, after carefully following detailed operating instructions, the
• Never place unit on support or
unit does not operate properly, do not attempt to open or
stand that is not firm, level,
remove covers, or make any adjustments not described in the
and adequately strong.
manual. Unplug unit and contact a qualified service technician.
The unit could fall causing
2 REPLACEMENT OF PARTS
serious injury to a child or
Make sure the service technician uses only parts specified
adult and damage to the unit.
by the manufacturer, or have equal safety characteristics as
• Move any appliance and cart
original parts. The use of unauthorized substitutes may
combination with care. Quick
result in fire, electric shock, or other hazards.
stops, excessive force, and uneven
3 SAFETY CHECK AFTER SERVICING
surfaces may cause objects to overturn.
After unit is serviced or repaired, request that a through safety
• Carefully follow all operating instructions.
check be done as described in the manufacturer’s service
literature to insure video unit is in safe operating condition.
2
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
LSQT0517A_01p09.p65
2
11/12/2001, 12:02 PM


...

Este manual também é adequado para os modelos :
TV - PVC2032W (1.34 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias