Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
If you do not do so within this time, the unit automatically returns to the TV level. a) Use the Select key to select the HiFi level. The coloured LED HiFi lights. b) Press the key , release it and then press and hold the F3 key until the LED blinks twice. 9 3. Remote control unit programmed for a level, first select the level as described in section 1.1, steps a) and b). b) Enter on the numeric keys. The LED blinks twice to acknowledge your input. c) Press numeric key (for the first digit of the code). The LED now blinks the number of times corresponding to the programmed digit (if, for example, the LED blinks three times, the digit 3 is programmed). d) Press numeric key (for the second digit of the code). The LED now blinks the number of times corresponding to the programmed digit (if, for exam- ple, the LED does not blink, the digit 0 is programmed). e) Press numeric key (for the third digit of the code). The LED now blinks the number of times corresponding to the programmed digit (if, for example, the LED blinks seven times, the digit 7 is programmed). In this example, the currently programm- ed code is thus If you lose count while reading out the code, simply start again at step 2c). c) Press the F1 key: the LED blinks once. d) Enter the desired code (see the code list) with the numeric keys. If this code is accepted, the LED again blinks twi ce. If the code does not exist in the table, the LED lights for about two seconds. 1.4 Station search Follow the instructions for programming the code for VCR, DVD, CD, tuner, tape as far as the step where the code number is entered. Then enter the three-digit code number "001" for the station search. The LED blinks twice to acknowledge the input. Then press and hold the "Station-search" key (which depends on the operating level; see the table on pages 10 and 11) until the device stops or is switched off (a STOP or OFF command is issued automatically every 1.5 seconds). Release the "Station search" key and press the "Select" key to confirm that you want to execute a station search (the code which was found is saved). After completion of the station search, or when all code numbers have been interrogated, the corresponding LED blinks five times. 2. Determining which code is already programmed (readout mode) When you select the steps a)...e) ,you have about 15 seconds to continue with the next step. If you do not do so within this time, the unit automatically returns to the TV level. a) In order to determine which code is 10 Key V C R 1 / 2 On / Standby Record a Time in display b c Numeric keys:programme selection Programme +/– Fast forward/Rewind OK TV volume +/– Mute TV MENU On R F 1 F 2 F 3 0...9 P +/– < > OK Vol.+/– Mute Menu Text TV-set INFO* Pause STOP / Statiom search PLAY Slow-motion AV input Select operating Info I I red green white yellow blue TV AV Select EPG Switching voltage on/off** 21 22 3. Remote control unit 21 22 * In preparation: If the TV set is switched on, the current operating level is indicated. ** AV-Link with Panasonic VCR Note: The assignments of the operating levels to the device functions apply only for the AV devices preset in the factory. If other AV devices in accordance with the code table are used, some of these assignments may differ or be restricted. Station search: Programme the code for VCR, DVD, CD, tuner or tape and execute the steps up to the input of the code number. Then enter "001" as the 3-digit code for station search. The LED blinks twice to acknowledge this input. Then press and hold the 3. Remote control unit Key DVD H i F i C D ( F 1 ) T U N E R ( F 2 ) T A P E ( F 3 ) On On / Standby ON: display time/track ON + AV, ON: on/standby ON: radiotext on/off ON + AV, ON: on/standby R Return a F 1 Angle F1 & ON: CD F1 & ON: CD b F 2 Audio F2 & ON: tuner F2 & ON: Tuner c F 3 Subtitle F3 & ON: tape-input F3 & ON: tape input 0...9 Numeric keys: title selection Num.Keys: title selection N.Keys: programme selection P +/– Cursor up / down Titel +/– Programme +/– < > Cursor left/right Frequency +/– OK OK / Enter Vol.+/– TV volume +/– AMP volume +/– AMP volume +/– AMP volume +/– Mute Mute TV Menu MENU Text Display Info TV set INFO* TV set INFO* TV set INFO* TV set INFO* I I Pause PAUSE red STOP / Station search STOP / OPEN-CLOSE / Station search num. key =Station search Station search green PLAY PLAY white EJECT yellow Skip + blue Skip – TV AV Repeat AUX Input AUX input AUX input 21 Select Select operating level Select operating level Select operating level Select operating level 22 EPG Title "Station search" key (depending on the operating level: see the table) until the device stops running or switches off (an OFF or STOP command is automatically transmitted every 1.5 seconds). Release the "Station search" key and start the search with the "Select" key (the code you entered is saved). When the station search has been completed or all code numbers have been interrogated,...