Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
It is not compatible with a central heating system. * Set the switch to Standby to cut power to the heater. This will not affect the time and temperature settings. • Connection TURN OFF POWER TO THE HEATING SYSTEM AT THE MAIN POWER PANEL TO AVOID ELECTRICAL SHOCK. • The installation must be carried out by an electrician. • All cables and connections must conform to the local electrical code. • Special CO/ALR solderless connectors must be used when connecting with aluminum conductors. • Install the thermostat onto an electrical box. • Install the thermostat about 5 feet high, on an inside wall facing the heater. • Avoid locations where there are air drafts (such as the top of a staircase or an air outlet), dead air spots (such as behind a door), or direct sunlight. • Do not install the thermostat on a wall that conceals chimney or stove pipes. • Connect the thermostat wires to the 240 V line and to the load using solderless connectors for copper wires. • Push the excess wire back into the electrical box to prevent interference with the thermostat. • Secure the thermostat using two 6-32 screws. • Return power to heating system. NOTE: Always keep the thermostat's vents clean and unobstructed. 240 VAC 60 HZ BBRBRRRBPower Load TH110 User Guide Programmable Thermostat • Configuration The configuration switches are on the back of the thermostat. Default (factory) settings are inside the gray cells. # Configurations UP DN SW1 Not used SW2 Early Start a Disable Enable SW3 Time format 12-hour 24-hour SW4 Temperature format b °F °C a. Early Start can be used in Automatic mode only. When this function is enabled, the thermostat calculates the optimal time to start heating in order to obtain the desired temperature by the set time. The thermostat re-assesses the start time daily based on the previous day’s performance. b. If you change the temperature display format, the preset temperatures ( , and ) will return to their default settings. • Power-up Upon power-up, the thermostat is in manual mode ( ) and displays the actual temperature. • Press the Hour and Min buttons to set the thermostat’s clock. • Press the Day button to set the day. • Temperature Setting Setpoint The thermostat normally displays the actual temperature. To view the set- point, press the or button briefly. The setpoint will appear for the next 5 seconds. To change the setpoint, press the or button until the desired temperature is displayed. To scroll faster, hold the button. Using a preset temperature The thermostat has 3 preset temperatures: • Comfort temperature • Economy temperature • Vacation temperature Icon Intended use Default setting Comfort (when at home) 21°C (70°F) Economy (when asleep or away from home) 16°C (62°F) Vacation (during prolonged absence) 10°C (50°F) • To use the Comfort or Economy temperature, press the or button respectively. The corresponding icon will be displayed. • To use the Vacation temperature, press both and buttons simultaneously. The icon will be displayed. Storing a preset temperature To store the Comfort or Economy temperature: Set the desired temperature using the or button. Press and hold the appropriate button ( or ) for approximately 3 seconds until the corresponding icon is displayed. Press the Mode button. To store the Vacation temperature: Set the desired temperature using the or button. Press and hold both and buttons simultaneously for approximately 3 seconds until the icon is displayed. Press the Mode button. On/Standby switch Operating mode icons Heating indicator Periods Temperature preset buttons Temperature adjustment Time and day Appears during the setpoint display Temperature Preset temperature icons To set the day To set the time To program the schedule To skip a period To select the operating mode TH110 400-110-000-A 2/6/05 1/2 • Operating Modes Automatic - The temperature is set according to the energy-saving schedule. To place the thermostat in this mode, press Mode until is displayed. The icons of the current period and preset temperature are also displayed. Temporary Bypass: If you modify the setpoint (by pressing the , , or button) when the thermostat is in automatic mode, the new set- point will be used until the end of the current period. When the next period starts, the temperature set for that period becomes the new set- point. Manual - The energy-saving schedule is not used. The temperature must be set manually. To place the thermostat in this mode: • Press Mode until is displayed. • Set the temperature using the , , or button. Vacation -The thermostat is set to the Vacation temperature. Press both and buttons simultaneously to place the thermostat in Vacation mode. • Energy-saving Schedule The schedule consists of 4 periods per day which represents a typical week day. You can program the thermostat to skip the periods that do not apply to your situation. For example, you can skip periods 2 and 3 for the weekend. Period Description Associated preset temperature Wake-up Away from home R...