Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
Therefore, it is suggested actual time you want your home to reach the desired temperature. For example, 6 degree setback, set your Morning event at 6:00 AM to be sure the desired temperature is reached by 7:00 AM. NOTE: This thermostat can be programmed with either 2 events per day (day and night) or day, evening, and night). Before programming the thermostat, decide which setting is best The thermostat is factory preset for 4 events per day. To change to two events per day, refer to page 20 “Optional Settings for Additional Thermostat Features, ” or contact your contractor for assistance. – 6 – 110-7/12/8:57 Page 9 PROGRAM SCHEDULE TIME SCHEDULE THERMOSTAT DESIRED EVENT SYMBOL TEMPERATURE Mon Tue Wed Thu Fri Sat Sun SETTING Morning Heat = Cool = Day Heat = Cool = Evening Heat = Cool = Night Heat = Cool = NOTE: While programming you must press a button at least every 2 minutes or the thermostat operational mode. If this happens, simply repeatedly press or press and hold the PROGRAM button until you get back to where you left off. The information you have already entered has been retained. NOTE: If consecutive events have the same temperature, you can skip an event by simultaneously PROGRAM and MODE buttons. Press and release the PROGRAM button to advance to the next event. – 7 – 110-7/12/8:57 Page Setting Or Program Times Step 1: Press and release the PROGRAM button. “ Mo” or the current day of the week will Morning “ “ event symbol will appear on the display. Press the DECREASE button or INCREASE button to access the day of the week you wish start programming or to change the existing program. Step 2: Press and release the PROGRAM button. The hours and “ AM” or “ PM” will flash. Press the DECREASE button or INCREASE button to set the start time hours for the Morning “ “ event for Monday (or any other day as set in step 1) . – 8 – 110-7/12/8:57 Page Step 3: Press and release PROGRAM button. The minutes will flash Press the DECREASE button or INCREASE button to set the select time minutes for Morning “ “ event (program times are set in ten-Step 4: Press and release the program button. The Day “ ” event symbol, flashing hours, and “ AM” or “ PM” will appear on the display. Repeat steps 2 and 3 for the Day “ ” , Evening “ ” , and Night “ ” . Step 5: Press and release the PROGRAM button. The word “ Copy” and the day just programmed will appear on the display. If your schedule is the same for consecutive days, press the DECREASE button or INCREASE button to add days to the display. This prevents from having to program the same times over and over again or continue on to step 6 to program the Step 6: Press and release the PROGRAM button to continue to the next day to be programmed. Repeat steps 2-5 for each day. – 9 – 110-7/12/8:57 Page button until the “ ” event symbol Morning “ ” button or INCREASE “ “ event temperature. button to set the desired Morning – 10 – 110-7/12/8:58 Page Step 4: Repeat steps 2 and Day “ ” , Evening “ ” , and Night “ ” events. NOTE: If thermostat is set for 2 events only the Day “ ” and Night “ ” events can be programmed. Setting Or Changing NOTE: Cooling temperatures must be set at least 2 degrees higher than heating temperatures. (Example: If heating 70°F, cooling temperature must be set to at least 72°F or If not set at least 2 degrees higher, the thermostat will automatically lower the previously programmed heating temperature to maintain 2 degree separation. – 11 – 110-7/12/8:58 Page Step 1: Press and release MODE button until the word “ COOL” and the “ ” cooling symbol appear Step 2: To set all program temperatures, the SET TEMP button. The Morning “ ” event symbol and flashing temperature will appear Step 3: Press the DECREASE button or INCREASE to set the desired morning event temperature. ” , and Night “ ” events. Step 4: Repeat steps 2 and 3 for the Day “ ” , Evening “ NOTE: If thermostat is set for 2 events per day, only the Day “ ” and Night “ ” events can be programmed. button – 12 – 110-7/12/8:58 Page Reviewing Programmed Schedules And Temperature Settings Step 1: Press and release the MODE button repeatedly to advance (heating or cooling). Step 2: Press and release the PROGRAM button to begin review. Continue pressing the PROGRAM button to review the time schedules and temperature review a specific day use the DECREASE INCREASE button to access the day without having to view previous programmed days. To Start Running The Program After all temperatures and start times have been programmed, press RESUME button to start running programs. If no button is pressed thermostat will resume 15 seconds. – 13 – 110-7/12/8:58 Page For Best Performance The Aprilaire Model 8556 thermostat The following guidelines should 1. When the thermostat is operating, close temperature sensor. 2. Do not place anything which can give off warm such as candles or portable humidifiers, near the thermostat. 3. Although the thermostat is internally equipped to prevent conditioner, it is possible to inad...