Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
Smoothing: Smoothing is useful if you feel that the displayed speed or pace values appear to be too erratic. Smoothing applies an averaging filter and may cause the displayed speed or pace values to respond more slowly to changes. > Speed smoothing: Turn speed smoothing off or on. >- Pace smoothing: Turn pace smoothing off or on. 59 Altitude settings >- Smoothing: Smoothing is useful if you feel that the displayed altitude value appears to be too erratic. Smoothing applies an averaging filter and may cause the displayed altitude value to respond more slowly to changes. You can turn altitude smoothing off or on. >- Update ascent rate: Set the Watch to update the period at which the ascent rate is calculated. You can choose intervals of 30 seconds, or 1, 10, 30, or 60 minutes. Set this feature shorter for faster vertical activities such as skiing or longer for slower vertical activities such as climbing. Hands-Free settings Hands-free features automate chronograph features, freeing you to focus on your workout instead of operating your Watch. Even when enabled, you can still take manual splits without affecting the hands-free operation. Configure the following hands-free settings: >- Auto split: This feature enables the chronograph to automatically take splits based on elapsed distance or time. For instance, you can configure the Watch to take a split every 10 minutes, or, if you set Auto Split to 1 MI, then the Watch will automatically take a split every mile. >- Auto start: This feature enables the chronograph to start when you start moving. It may take a few seconds for the GPS-3D Sensor to detect movement, causing a slight delay in start time. 60 >- Auto stop: This feature enables the chronograph to stop when you stop moving. It may take a few seconds for the GPS-3D Sensor to detect that you have stopped moving, causing a slight delay in stop time. >- Sync tinier & chrono: This feature allows you to set the interval timer and the chronograph to start and stop simultaneously so you can record chronograph data when you use the interval timer. The completion of an interval in Interval Timer Mode will cause the Watch to take a split in the chronograph. Use this feature if you want a record of your performance for each interval in your workout. Each interval corresponds to one lap or segment in Lap Data Mode. You must turn the sync timer & chrono setting off if you want the timer to switch to Chronograph Mode at the end of a countdown in Basic Timer Mode. Watch settings Configure the following Watch settings: > Night-Mode® feature: When enabled, the INDIGLO® night-light turns on when you press any button. This feature disables itself after eight hours. >- Hourly chime: When enabled, the Watch will chime at the top of every hour. >- Button beep: When enabled, the Watch will emit a beep when you press any button. 61 >- Mode hiding: You can choose to show or disable the following modes: Interval, Lap Data, Summary, Timer, or Alarm. For example, if you disable Lap Data Mode it will not show up at all until you enable it again from Configure Mode. You can also choose to show, hide, or disable Vertical Mode or Finish Mode. >- Data hiding: You can choose to show or hide blank data from the Fitness Sensors. For instance, if you do not use the HR Sensor for your workout and you choose to hide blank HR Sensor data, you will not see any information related to heart rate since this data relies on the use of the HR Sensor. Unit settings Configure the following unit settings: >- Distance: Set the Watch to display distance in terms of miles, kilometers (KM), or nautical miles (NM). > Speed: Set the Watch to display speed in terms of miles per hour (MPH), kilometers per hour (KPH), nautical miles (NM), or auto. >- Pace: Set the Watch to display pace in terms of miles (MPH), kilometers (KPH), nautical miles (NM), or auto. v Altitude: Set the Watch to display altitude in terms of feet, meters, or auto. 62 In unit settings you can set speed, pace, and altitude to any unit independently or to the default auto setting. When set to auto, each setting automatically follows the distance unit setting. This allows you to quickly change units for all your data displays without having to adjust every setting every time, yet allows flexibility for certain situations. For example, a runner typically chooses kilometers for her unit settings. However, when running a marathon, she changes her distance unit to miles (a marathon is always 26.2 miles), but she chooses the kilometers unit setting for pace. During the marathon, the runner can view her distance in miles to match the course markers of the race, but she can view her pace in the more familiar minutes per kilometers for a greater understanding of how quickly she is running. 63 CARE & MAINTENANCE Changing the battery WARNING: CHANGING THE BATTERY YOURSELF MAY RESULT IN DAMAGE TO THE WATCH. TIMEX RECOMMENDS YOU HAVE A WATCH RETAILER OR JEWELER REPLACE T...
Este manual também é adequado para os modelos :Monitores de pressão arterial - M187 (1.34 mb)
Monitores de pressão arterial - M576 (1.34 mb)
Monitores de pressão arterial - M579 (1.34 mb)