Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
3. Press S2 button to return to CHRONOGRAPH mode. NOTE: The lap record will be cleared when chronograph is reset. TO SET THE ALARM TIME 1. Press S3 button to select ALARM mode. 2. Press S2 button toggle between HOME ALARM (HOME) and TIME 2 ALARM (T2) to set. 3. Press and hold S2 button for around 2 seconds, the hour digits will blink. 4. Press S1 button to set the hour digits. Holding down the button will speed up the process. 5. Press S3 button once, the minute digits will blink. 6. Press S1 button to set the minute digits. 7. After finishing making all the settings, press S2 button to confirm. NOTE: The alarm will automatically be activated after being set. TO TURN ON/OFF THE ALARM AND HOURLY CHIME In ALARM mode, 1. Press S2 button toggle between HOME ALARM and TIME 2 ALARM to set. 2. Press S1 button once to activate the hourly chime. Chime indicator will appear. 3. Press again to activate the alarm. Alarm indicator will appear. 4. Press the third time to activate both functions. Both of the indicators will appear. 5. Press the fourth time to deactivate both functions. Both of the indicators will disappear. WHEN AN ALARM OR HOURLY CHIME GOES OFF A beep will be emitted by the hour if the hourly chime is activated. An 20-second alarm tune will be emitted at the designated time when the alarm is activated. To stop the tune, press any button. TO SET THE TIMER 1. Press S3 button to select TIMER mode. 2. Press and hold S2 button for around 2 seconds, the hour digits will blink. 3. Press S1 button to set the hour digits. Holding down the button will speed up the process. 4. Press S3 button, the minute digits will blink. 5. Press S1 button to set the minute digits. 6. Press S3 button, the second digits will blink. 7. Press S1 button to set the second digits. 8. After finish making all the settings, press S2 button to confirm. TO USE THE TIMER In TIMER mode, 1. Press S1 button to start counting. 2. To stop counting, press S2 button. Press S1 button to resume from where it left off. 3. To reload the timer, press S2 button to stop counting, and then press S2 button again. 4. After reaching zero in a countdown, a tune will be emitted. To stop the tune, press any button. TO USE THE BACKLIGHT Press S4 button to turn on the backlight for 3-5 seconds. OTHERS In any setting procedure, if there is no key manipulation for around 1-2 minutes, the watch will automatically save the entered data and exit the setting procedure. WATER RESISTANCE SUITABLE ATMOSPHERE 3 ATM / 50 METERS / 100 FEET /30 METERS H2O Suitable for washing hands and light splashing 5 ATM / 50 METERS / 165 FEET /50 METERS H2O Suitable for light swimming. E.g.: Bathing in a pool or lowtide waters, but not suitable for diving 10 ATM / 100 METERS / 330 FEET /100 METERS H2O Suitable for most water sorts. E.g.: Swimming, surfing and snorkeling, but not suitable for deep water diving 20 ATM / 200 METERS / 660 FEET /200 METERS H2O Suitable for most water sports including deep water diving WATER RESISTANCE GUIDE FOLLOW THESE 8 TIPS TO GET THE MOST OUT OF YOUR NEW WATCH! 1. Never pull out the crown or operate the pushers/buttons under water. 2. Make sure your crown is returned to the original position before you expose your watch to water. 3. If your watch is exposed to saltwater it is very important to wash it thoroughly under tap water and wipe dry with a soft cloth. Keep it clean! 4. Severe impacts or drops may affect your watche...
Este manual também é adequado para os modelos :Monitores de pressão arterial - Bella FS80983 (37.19 kb)
Monitores de pressão arterial - Bella FS80982 (37.19 kb)