Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
• “Lap time” refers to an elapsed time required to cover a given section of the whole distance. Lap time Split time Start 1. STANDARD MEASUREMENT Hour Seconds Minutes 1/100 seconds START STOP RESET 8 2. ACCUMULATED ELAPSED TIME MEASUREMENT 9 START STOP RESTART RESET STOP Restart and stop of the stopwatch can be repeated by pressing “A”. B A A A 10-11 10 3. SPLIT TIME/LAP TIME MEASUREMENT Note: When the number of stored measurements exceeds 90, fl ashing “FULL” appears, and when it exceeds 100, a warning sound starts beeping. B A B A B B START SPLIT-LAP 1 SPLIT-LAP 2 RESET STOP SPLIT-LAP 8 The split/lap time can be measured repeated by pressing “B”. Split/lap number Split time Lap time Accumulated elapsed time Finish time 11 The stopwatch can store up to 100 split times, 100 lap times and total elapsed time. They are automatically entered into the memory. • With each press of “C”, the time stored is recalled. The time can be recalled successively by keeping the button pressed. • To stop the recall of the stored data, press “A”, “B”, or “D”. The measurements when the stopwatch was stopped will be shown. Then, press “B” to reset the digits to “00”. 4. HOW TO USE THE MEMORY FUNCTION B C C A C C “RECALL” more Reset to “00” Finish time 12-13 12 • The time stored in the memory can be recalled even while the stopwatch is measuring. Notes: 1. Even if the digits are reset to “00”, stored times are not erased and can be recalled by pressing “C” unless new measurement is started. 2. If the stopwatch is left untouched with the recalled times shown, the display will automatically return the STOPWATCH display in 1 to 20 minutes. • To measure the lap time and split time while the stored data are being recalled operate the buttons as follows. Press “B” to measure new lap time and split time. Press “A” to stop the measurement. Press “D” to return to the measurement mode. With each press of “C” When the stopwatch is stopped Split time and lap time are recalled starting with the first ones. When the stopwatch is measuring The times are recalled starting with the last ones. B A 13 Press “D” to show the STROKE/FREQUENCY MEASURING display. Start the measurement by pressing “A” and stop the measurement by pressing “A” after the third stroke was made. The number of strokes per minute will be displayed. STOKE/FREQUENCY MEASURING B Start Measuring Stop Reset A A B Start Stop STROKE/ FREQUENCY MEASURING mode The number of strokes per minute (23.2) 14-15 14 Notes: 1. During 1 second after the measurement has been started by pressing “A”, flashing “180.0” is displayed. If the measurement is stopped by pressing “A” during this period, “Err” will appear. If the measurement is not stopped by pressing “A” after more than 18 seconds have elapsed, “Err” will automatically appear. Therefore, note that measurable number of strokes per minute is between 10 and 180. 2. If “B” is pressed while the measurement is stopped or “Err” is shown, the digits will be reset “0.0”. Even if the digits are not reset to “0.0” with the measurement stopped or “Err” shown on the display, the measurement can be started by pressing “A”. Error 15 NO-PROOF-OF-PURCHASE LIMITED WARRANTY See label on back of unit for details, or check REGISTER NOW Please return your AX602FY Registration to the Repair Center address in the warranty, and we will let you know about future products. Email (preferred) User ...
Este manual também é adequado para os modelos :Monitores de pressão arterial - AX602FY (760.68 kb)