Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears. <2>PARAMETER SET PEEL OFF STS OFF Use the [FEED] or [RESTART] key to select a desired option. PEEL OFF STS OFF [RESTART] A strip wait status is sent when the printer receives the next issue command and the previously printed label is waiting to be removed. [FEED] PEEL OFF STS ON A strip wait status is sent when a printed label is waiting to be removed. After selecting the Strip Wait Status, press the [PAUSE] key. (15) FEED Key Function Selection This parameter is to choose the function of the [FEED] key. When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears. <2>PARAMETER SET FEED KEY FEED Use the [FEED] or [RESTART] key to select a desired option. FEED KEY FEED [RESTART] The [FEED] key will feed one media when [FEED] pressed. FEED KEY PRINT The [FEED] key will print the data in the Image Buffer (The last printed data) After selecting the FEED key function, press the [PAUSE] key. E2-28 2. PRINTER SETUP ENGLISH VERSION EO1-33057 2.8 Setting an Operating Environment 2.8.1 Parameter Setting (Cont.) NOTE: Kanji code selection is not supported by the QM model as the Kanji ROMs are not installed. NOTE: Pressing the [FEED] or [RESTART] key causes 1 byte change in the Euro Code value. (16) KANJI Code Selection This parameter is to choose a KANJI code. When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears. <2>PARAMETER SET KANJI CODE TYPE1 Use the [FEED] or [RESTART] key to select a desired option. [RESTART] [FEED] KANJI CODE TYPE1 KANJI CODE TYPE2 Windows code Original code After selecting a Kanji code, press the [PAUSE] key. (17) EURO Code Selection This parameter is to choose a Euro code (€). When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears. <2>PARAMETER SET EURO CODE B0 Use the [FEED] or [RESTART] key to select a desired option. [RESTART] [FEED] EURO CODE 20 EURO CODE 21 EURO CODE FE EURO CODE FF After selecting a Euro code, press the [PAUSE] key. E2-29 2. PRINTER SETUP ENGLISH VERSION EO1-33057 2.8 Setting an Operating Environment 2.8.1 Parameter Setting (Cont.) NOTES: 1. It is recommended that this function should be activated when high quality printing such as bar codes printing is required. Otherwise, choose OFF. 2. When a broken element is found, the printer stops, displaying “HEAD ERROR”. The error state can be cleared by pressing the [RESTART] key, but if the broken element affects bar code readability or actual operations, please replace the print head with a proper one. (18) Auto Print Head Check Selection This parameter is to choose whether to perform the Auto Print Head Check function at the power on time. When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears. <2>PARAMETER SET AUTO HD CHK OFF Use the [FEED] or [RESTART] key to select a desired option. AUTO HD CHK OFF [RESTART] Auto print head broken element check is not performed. [FEED] AUTO HD CHK ON Auto print head broken element check is performed. After selecting auto print head check, press the [PAUSE] key. (19) Centronics Interface ACK/BUSY Timing Selection This parameter is to choose an ACK/BUSY timing of the Centronics interface. “TYPE1” has been chosen as default, but if a communication error occurs or a communication is not properly made, change to “TYPE2”. When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears”. <2>PARAMETER SET ACK/BUSY TYPE1 Use the [FEED] or [RESTART] key to select a desired option. ACK/BUSY TYPE1 [RESTART] A rise of ACK signal and a release of [FEED] BUSY occur at the same time. ACK/BUSY TYPE2 A fall of ACK signal and a release of BUSY occur at the same time. After selecting an ACK/BUSY timing, press the [PAUSE] key. E2-30 2. PRINTER SETUP ENGLISH VERSION EO1-33057 2.8 Setting an Operating Environment 2.8.1 Parameter Setting (Cont.) NOTE: When “WEB PRINTER ON” is selected, the status of the printer connected in a network can be checked through the Web browser. (20) Web Printer Function Selection This parameter is to choose whether to use the printer as a web printer. When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears. <2>PARAMETER SET WEB PRINTER OFF Use the [FEED] or [RESTART] key to select a desired option. [RESTART] WEB PRINTER OFF Unavailable [FEED] Available WEB PRINTER ON After selecting the Web printer function, press the [PAUSE] key. (21) Media Sensor Selection This parameter is to choose the media sensor type to be used. When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears. <2>PARAMETER SET SENS POSI CENTER Use the [FEED] or [RESTART] key to select a desired option. [RESTART] SENS POSI CENTER Fixed sensor [FEED] Movable sensor SENS POSI EDGE After selecting the media sensor type, press the [PAUSE] key. E2-31 2. PRINTER SETUP ENGLISH VERSION EO1-33057 2.8 Sett...
Este manual também é adequado para os modelos :Equipamentos de Loja - EO1-33057D (1.65 mb)
Equipamentos de Loja - B-SX8T SERIES (1.65 mb)