Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
In addition, the variety of tape cartridges available allows you to print labels with different widths and exciting colours. Read this User’s Guide carefully before starting and keep the User’s Guide in a handy place for future reference. • Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. • Do not disassemble or modify the machine/AC adapter. • Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry cloth. • Do not touch the print head mechanism. Use a soft wipe (e.g. a cotton swab) when cleaning the print head. • To avoid injuries, do not touch the cutter's edge. • To prevent damage or breakage, do not press on the LCD display. • Do not put any foreign objects into or heavy objects on the machine. • Do not leave any rubber or vinyl on the machine for an extended period of time, otherwise the machine may be stained. • Do not get the machine/AC adapter/power plug wet, such as by handling them with wet hands or spilling beverages on to them. • Do not expose the machine/AC adapter to extremely high temperatures or high humidity. Never leave them on the dashboard or in the back of your car, near heaters or other hot appliances. Keep them out of both direct sunlight and rain. • Avoid using the machine in extremely dusty places. • Depending on the environmental conditions and the applied settings, some characters or symbols may be difficult to read. • Do not pull on the tape being fed from the P-touch labeler, otherwise the tape cassette or P-touch labeler may be damaged. • Do not attempt to cut the tape while printing or feeding since this will damage the tape. • Do not try to print labels using an empty tape cassette set in the P-touch labeler. Doing so will damage the print head. • Remove the batteries and disconnect the AC adapter if you do not intend to use the machine for an extended period of time. (Note: When power is disconnected for more than five minutes, all text, format settings and any text files stored in the memory will be cleared.) • Do not use old and new batteries together or mix alkaline batteries with other type batteries, or set the positive and negative end in the wrong position. Otherwise, the batteries may leak or be damaged. • Do not use metallic articles, such as tweezers or metallic pen, when exchanging the batteries. • Always use the specified voltage and the suggested AC adapter (AD5000) for this machine to prevent any damage or failure. • To prevent fire or electric shock, make sure that the plug of the AC adapter is fully inserted into the power outlet. Do not use an outlet that is loose. INTRODUCTION GENERAL PRECAUTIONS Unpacking Your P-touch Labeler Check that the package contains the following before using your P-touch labeler. Included items may differ by distribution. Power Supply Make sure that the power is turned off when replacing batteries. Turn the machine over and remove the battery compartment cover. If batteries are already installed, remove them. Insert six new AA-size alkaline batteries (LR6), making sure that their poles point in the correct directions. Always replace all six batteries at the same time using brand new ones. Attach the battery compartment cover by inserting the three hooks at the bottom into the slots on the machine, then pushing down firmly on the cover until it snaps into place. Tape Cassettes Make sure that the power is turned off when replacing a tape cassette. Open the tape compartment cover by lifting up both sides at the same time. If a tape cassette is already installed, remove it by pulling it straight up. Insert a tape cassette, making sure that it snaps into place. • Make sure that the end of the tape feeds under the tape guides. • If the ink ribbon is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette. After you have installed the tape, feed the tape ( + ) once and then push in the tape cutter lever to cut the tape. Securely close the front cover, making sure that it snaps into place. When using optional AC adapter (model AD5000) Insert the plug on the adapter cord into the adapter jack on the right side of the machine. Insert the plug into the nearest standard electrical outlet. For memory back up, we recommend using AA-size alkaline batteries (LR6) together when using the AC adapter. TZ tape cassette Accessories Guide PT-1880 User's Guide Warranty Card Battery compartment cover Tape compartment cover End of tape Tape guide Toothed Wheel Keyboard & LCD Turning the Power On Setting Language ( > [Language] / > [English] / Setting unit (mm/inch) > [Unit] / > [mm] / • The LCD shows one row of 15 characters; however, the text that you enter can be up to 80 characters in length, which will scroll across the display. • Use with Shift key to go to beginning/end of the text. • The machine automatically turns off if no key is pressed within 5 minutes. • To cancel operations, press . • To initialize the P-touch labeler back to factory s...