Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
3 Press u or d until the desired setting is displayed, and then press n. If TEXT SIZE is selected and more text is added, the character size is reduced so the text fits within the specified label length. If TEXT WIDTH is selected and more text is added, the character width is reduced so the text fits within the specified label length. However, after the character width is reduced to THIN, the character size will be reduced so the text fits within the specified label length. Calibrating the label length If the length of the printed label does not correspond to the length specified with the Length function, the printed label length can be recalibrated with the Length Adjust function by selecting a setting between -5 and +5. (The default setting is 0.) 1 Press g, then Z. 2 Press l or r until LENGTH ADJUST is displayed. 3 Press u or d until the desired setting is displayed, and then press n. Machine Adjustments 43 Updating the PERSONAL symbol category You can specify whether symbols continue to be added to the PERSONAL symbol category (with the older symbols deleted) when the category becomes full (ON) or symbols are no longer added after the PERSONAL symbol category becomes full (OFF). (The default setting is ON.) 1 Press g, then Z. 2 Press l or r until SYMBOL UPDATE is displayed. 3 Press u or d until the desired setting is displayed, and then press n. Changing the units of measure The units used for displaying measurements can be set to millimeters (mm) or inches (inch). (The default setting is mm.) 1 Press g, then Z. 2 Press l or r until UNITS is displayed. 3 Press u or d until the desired setting is displayed, and then press n. Displaying version information This function can be used to display the version information for the P-touch software and built-in symbol set. 1 Press g, then Z. 2 Press l or r until VERSION INFO is displayed. 3 Press u or d until the desired version information is displayed. 4 Press n to exit Setup mode. Cleaning Cleaning Occasionally, certain parts of the P-touch may need to be cleaned. Dust or dirt may become attached to the P-touch’s print head and rollers, particularly when the unit is used outdoors or in a very dusty environment. With use, the tape cutter may become covered with adhesive, making it difficult to cut the tape. Cleaning the print head, rollers and tape cutter . Before cleaning the print head, rollers and tape cutter, press o to turn off the P- touch, and then remove the battery and disconnect the AC adapter. WARNING • • Do not touch the print head directly with your bare hands. The print head may be hot. Do not touch the cutter blade directly with your bare hands. Dry cotton swab Print head Dry cotton swab Tape cutter blades Dry cotton swab Tape cutter blades Machine Adjustments 45 Notes on cleaning the print head & rollers . If a blank horizontal streak appears through the label text, clean the machine’s print head. . The print head can be cleaned more easily if the optional print head cleaning cassette (TZ-CL4) is used. Notes on cleaning the tape cutter . If the tape cannot be cut correctly, clean the tape cutter blades. 5 55 Using P-touch With a Computer (for PT-7600 only) This P-touch is equipped with a USB port, allowing you to connect it to a computer running Microsoft® Windows®. The enclosed CD-ROM contains P-touch Editor 5.0, which is installed together with the printer driver and P-touch Transfer Manager. . P-touch Editor 5.0 is a label-designing software that provides additional illustration and layout features enabling you to design more elaborate label templates and create databases. Once these label templates and databases have been created, they can be downloaded to the P-touch, where they can be used to print labels. . The P-touch Editor software and the printer driver must be installed before the P-touch is connected to the computer or turned on. . Only use the enclosed USB interface cable to connect the P-touch to the computer. . A single computer cannot be connected to multiple P-touch machines at the same time. . Although the P-touch can be connected to the computer through a USB connection, label layouts created in P-touch Editor cannot be printed directly from the application. Installing the Software & Printer Driver Introduction Features P-touch Editor Makes it easy for anyone to create a wide variety of custom labels in complex layouts by using fonts, templates, and clip art. Printer Driver Lets you print labels from the connected P-touch when using P-touch Editor on your PC. Using P touch With a Computer(for PT 7600 47 CD-ROM Precautions . Do not scratch the CD-ROM. . Do not subject the CD-ROM to extremely high or extremely low temperatures. . Do not put heavy objects on the CD-ROM or apply force to the CD-ROM. . The software contained on the CD-ROM is meant for use with your purchased machine only. It may be installed on multiple PCs for use at an office, etc. . Do not connect the USB cable to your PC until the software has been installed a...
Este manual também é adequado para os modelos :Equipamentos de Loja - P-TOUCH 7500 (4.44 mb)