Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Equipamentos de Loja - PT-H300 (10.98 mb)
Equipamentos de Loja - PT-H300 (11.44 mb)
Facilidade de uso
DO NOT disassemble, modify, orattempt to repair the rechargeablebattery. DO NOT dispose of the rechargeable battery in fire or intentionally overheat. This could cause the internal insulation to melt, gas to be emitted, or safetymechanisms to fail. Additionally, theelectrolyte solution could catch fire. DO NOT puncture the rechargeablebattery with any objects, subject it tosevere shocks or throw it. Damage to the rechargeable battery's protection circuitcould cause the rechargeable battery tobe recharged at an abnormal current/ voltage or cause an abnormal chemicalreaction within the rechargeable battery. DO NOT incinerate the rechargeable battery or dispose of it with household waste. Safety Precautions 1234567895 INTRODUCTION WARNING P-touch Labeler Follow these guidelines to avoid fire, electric shock, the risk of injury to yourself or others, and/or damage to the printer or other property. DO NOT allow the printer to get wet or use the printer in areas that may become wet, such as bathrooms or near sinks. DO NOT touch any metal parts near theprint head. The print head becomes veryhot during use and remains very hotimmediately after use. Do not touch itdirectly with your hands. DO NOT disassemble the P-touch labeler. For inspection, adjustment, and repair ofthe labeler, contact the retail outlet where the P-touch labeler was purchased or yourlocal authorized service center. Plastic bags are used in the packaging of your labeler. To avoid danger of suffocation, keep these bags away frombabies and children. If you notice heat, an abnormal odor, discoloration of the printer, deformation, oranything else unusual while using orstoring the printer, immediately discontinue use of the printer, disconnect the AC adapter, and remove the batteries. To prevent damage, do not drop or hit the P-touch labeler. DO NOT use the P-touch labeler with a foreign object in it. If water, a metallic substance, or any other foreign object enters the P-touch labeler, disconnect the AC adapter and remove batteries, and contact the retail outlet where the P-touch labeler was purchased or your local authorized service center. Alkaline batteries/Ni-MH rechargeable batteriesFollow these guidelines to avoid liquid leakage, heat, rupture of the battery and cause personal injury. DO NOT throw into fire, heat up, short- circuit, recharge, or disassemble the battery. DO NOT allow batteries to get wet, for example, by handling them with wet hands or spilling beverages onto them. If fluid leaked from the batteries gets into your eyes, immediately rinse your eyes with a large amount of clean water, and then seek medical attention. If leaked fluid enters your eyes, loss of eyesight or otherdamage to the eyes may result. DO NOT allow a metal object to contact both the plus and minus ends of a battery. DO NOT use sharp objects, such as tweezers or a metallic pen, to remove or replace the batteries. DO NOT use a damaged, deformed, orleaking battery, or a battery whose label isdamaged. Doing so may result in generating excessive heat. Use of adamaged or leaking battery may also leadto battery fluid getting on your hands. Iffluid leaked from the batteries gets ontoyour hands, there is a possibility ofchemical burns. If leaked fluid gets onto your hands and you rub your eyes, loss ofeyesight or other damage to the eyes may result. Immediately rinse your hands with a large amount of clean water, and then seekmedical attention. 6 Safety Precautions 1 2 3 4 5 6 7 8 9 7 .. INTRODUCTION Safety Precautions AC Adapter Follow these guidelines to avoid fire, damage, electric shock, failure or the risk of injury. Make sure that the plug is fully inserted in the power outlet. Do not use an outlet that is loose. Always use the specified AC adapter, and always plug the AC adapter into an electrical outlet with the specified voltage (120V). Failure to do so may result in injury to yourself or others, or damage to the printer or other property. Brother does not assume, any responsibility for any accident or damage resulting from not using the specified AC adapter and adapter cord. DO NOT connect the AC adapter or adapter cord to other products. DO NOT touch the AC adapter and the P-touch labeler during an thunderstorm. There may be a remote risk of electric shock from lightning when the printer is used during a thunderstorm. DO NOT touch the AC adapter or power plug with wet hands. DO NOT use the AC adapter in places with high humidity or moisture, such as bathrooms. DO NOT use a damaged adapter cord or power plug. DO NOT place heavy objects on, damage, or modify the adapter cord or plug. Do not forcibly bend or pull the adapter cord. DO NOT drop, hit, or otherwise damage the AC adapter. Tape Cutter DO NOT touch the blade of the cutter unit. WARNING INTRODUCTION CAUTION Alkaline batteries/Ni-MH rechargeable batteries Follow these guidelines to avoid liquid leakage, overheating or rupture of the battery. DO NOT use a battery other than theone specified for use with ...