Assessments - 0, GPA: 0
(
)
)
|
Fotos e especificações Brother PT-P700 |
Facilidade de uso
Your new P-touch labeler uses P-touch Editor Lite software, which is already installed on your P-touch labeler. There is no need to install any software or drivers onto your computer in order to make creative labels. This manual includes important precautionary information and simple instructions for operating your new P-touch labeler. Be sure to read the instructions before use and use the product in accordance with these instructions. Keep this manual handy for future reference. If new versions of the PT-P700 software become available, this manual may not reflect the updated features. Therefore, you may find that the software and the contents in this guide are different. Printed in China LAD095001 Safety Precautions Indicates a potentially hazardous situation which, if not WARNING avoided, could result in death or serious injuries. Follow these guidelines to avoid the risk of fire, burns, injury, electric shocks, rupture, overheating, abnormal odors or smoke. • Always use the specified voltage and the included AC adapter (AD-E001) for the P-touch labeler to prevent any damage or failure. • Do not touch the P-touch labeler during a lightning storm. • Do not use the P-touch labeler/AC adapter in places of high humidity such as bathrooms. • Do not overload the power cord. • Do not place heavy objects on, or damage the P-touch labeler, power cord or plug. Do not forcibly bend or pull the power cord. Always hold the AC adapter when disconnecting from the power outlet. • Make sure that the plug is fully inserted in the power outlet. Do not use an outlet that is loose. • Do not allow the P-touch labeler/AC adapter/power plug/batteries to get wet, for example, by handling them with wet hands or spilling beverages on to them. • Do not disassemble or modify the P-touch labeler/AC adapter/batteries. • Do not allow a metal object to contact both the plus and minus ends of a battery. • Do not use sharp objects, such as tweezers or a metallic pen, to change the batteries. • Do not throw the batteries into fire or expose to heat. • Disconnect the AC adapter, remove batteries immediately and stop using the P-touch labeler if you notice abnormal odor, heat, discoloration, deformation or anything unusual while using or storing it. • Do not use a damaged or leaking battery as the fluid may get on your hands. • Do not use a deformed or leaking battery or one whose label is damaged. There is a possibility of damaging the P-touch labeler. • Since loss of eyesight may result when leaked fluid from batteries gets into your eyes, immediately rinse your eyes with a large amount of clean water, and then seek medical attention. Indicates a potentially hazardous situation which, if not CAUTION avoided, may result in minor or moderate injuries. Follow these guidelines to avoid personal injury, liquid leakage, burns or heat. • When the P-touch labeler is not being used, store it out of the reach of children. In addition, do not allow children to put any P-touch labeler parts or labels in their mouths. If any object has been swallowed, seek medical attention. • Do not touch metal parts around the print head immediately after printing. • Do not touch the cutter blade. (See Parts Description.) • If leaked fluid from batteries gets on your skin or clothes, immediately rinse them with clean water. • Remove the batteries and disconnect the AC adapter if you do not intend to use the P-touch labeler. • Do not use any batteries other than those specified. Do not use combinations of old and new batteries or combinations of different types, different charging levels, different manufacturers or different models. Do not insert a battery with its plus and minus ends reversed. • Do not drop or hit the P-touch labeler/AC adapter. • Do not put your finger inside the P-touch labeler when you close the cassette cover. • Before using Ni-MH rechargeable batteries, carefully read the instructions for the batteries and battery charger, and be sure to use them correctly. • When using Ni-MH rechargeable batteries, charge the batteries with a specialized battery charger before using the batteries. • Depending on the location, material, and environmental conditions, the label may unpeel or become irremovable, the color of the label may change or be transferred to other objects. Before applying the label, check the environmental conditions andthe material. • Do not use the P-touch labeler in any way or for any purpose not described in thisguide. Doing so may result in accidents or damage to the P-touch labeler. • Use only Brother TZe tapes with the P-touch labeler. Do not use tapes that do not have the mark. • Only use a soft, dry cloth to clean the P-touch labeler; never use alcohol or other organic solvents. • Use a soft wipe to clean the print head; never touch the print head with your fingers. • Do not put any foreign objects into the tape exit slot or AC adapter connector or battery compartment, etc. • Do not place the P-touch labeler/batteries/AC adapter in...