Assessments - 3, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
A pointer appears next to the SMALL FONT indicator when the SMALL FONT is in use. • The following points all apply while SMALL FONT is in use. • All font settings are ignored. Everything is printed using the same font. • The proportional setting is turned off. • Changing the style or effect while SMALL FONT is in use can produce undesirable printing results. • Illustrations may not print correctly while SMALL FONT is in use. 41 E To change the default font setting 1. Press SET UP to display the SET UP menu. 2. Use and to select DEFAULT FONT and then press SET. 3. Use and to select the font you want to use as the default, and then press SET. • The default font you specified will be used first for all new labels. To change the font of text you have just input 1. After inputting the text you want, press FONT. 2. Use and to select the font you want to change to and then press SET. • This will apply the setting and return to the text input screen. E 42 Using STYLE Menu Attributes The STYLE menu lets you apply the following attributes to your text. NORMAL BOLD OUTLINE SHADOW RAISED • Note that STYLE menu text attributes cannot be applied to illustrations. To apply STYLE menu text attributes 1. Input the text whose attributes you want to change. 2. Press STYLE. 3. Use and to select the STYLE setting you want, and then press SET. • Selecting NORMAL will cancel the current STYLE menu setting. • Pressing SET will apply the setting and return to the text input screen. A pointer appears to indicate the current STYLE setting: [A] (BOLD), [ ] (OUTLINE), [ ] (SHADOW), [ ] (RAISED). No pointer is shown when NORMAL is selected. 43 E Using EFFECT Menu Attributes The EFFECT menu lets you apply the text attributes shown below to label text in the Free Design Mode. Examples SHADING UNDERLINE BOX To apply EFFECT menu text attributes 1. Input the text whose attributes you want to change. 2. Press EFFECT. 3. Use and to select the EFFECT setting you want. 4. Use and to select ON or OFF for EFFECT and then press SET. • This will apply the setting and return to the text input screen. Combining Effects SHADING, UNDERLINE, and BOX effects can be combined, if you want. SHADING + BOX SHADING + UNDERLINE • Using BOX and UNDERLINE in combination with certain character sizes can cause the underline and the lower line of the box to overlap with each other. E 44 Part 6 -Saving, Recalling and Deleting Labels To save a label 1. Create the label you want to save. 2. After you finish inputting text, the following screen will appear on the printer display. 3. Use and to select STORE. 4. Press SET. 5. Input up to seven characters for the label name, and then press SET. 6. Use and to select the location (1 to 10) where you want to save the label. • Up to 10 labels can be stored in memory. • If you specify the number of a location that already contains a label, existing label will be replaced by the new label when you press SET in step 7. 7. Press SET. 8. In response to the confirmation message that appears, press SET to save the label or ESC to abort. To recall a label 1. Press to turn on the printer. 2. Use and to select STORED DATA, and then press SET. 3. Use and to select RECALL, and then press SET. 4. Use and to scroll through the label names until the one you want to recall is displayed. 5. Press SET to display the label. • Now you can print the label or make any changes you want in it. To delete a label 1. Press to turn on the printer. 2. Use and to select STORED DATA, and then press SET. 3. Use and to select DELETE, and then press SET. 4. Use and to scroll through the label names until the one you want to delete is displayed. 5. Press SET. 6. In response to the confirmation message that appears, press SET to delete the label and return to step 2 of this procedure. • To cancel the delete operation, press ESC instead of SET. 45 E Part 7 - Configuring the Printer Setup The printer has a SET UP screen that you can use to configure a variety of basic settings. Part 7 - Configuring the Printer Setup The printer has a SET UP screen that you can use to configure a variety of basic settings. To configure the printer setup 1. Press to turn on the printer. 2. Press SET UP. 3. Use and to select the SET UP item whose setting you want to change, and then press SET. 4. Use the cursor keys to configure the settings and then press SET. When this setting is selected: Change its setting like this: DEFAULT FONT • Use and to select the font (page 42). INPUT • Use and to select INSERT or OVERWRITE (page 39). CONTRAST • Use and to adjust the display contrast. DENSITY* • Use and to adjust the print density setting. LANGUAGE • Use and to select the display language you want to use. cm/inch • Use and to select centimeters (cm) or inches as the unit of measurement. DEMO PRINT • Use and to select PRINT, and then press SET to start demo printing. * Certain environments and conditions may result in the printing density remaining the same, even after you change the DENS...