The spent backing paper runs from the dispensing edge around the drive roller [8D] to the rewinder [8E]. The dancer arm regulates the rewinding speed. The entire operation of the label dispenser is controlled and monitored electronically. If errors occur, the device controls output an appropriate notification for the operator. If necessary, the labelling operating mode is halted automatically. An electronic signal is output at the same time. The signal can be fed to an external controller and ev

. . 1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Technical status . . . . . . . . . . . . . . . . . . . . . . . . .1 Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Manufacturer. . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1.1.2 Illustrations and descriptions. . . . . . . . . . . . . . 2 Signs and symbols . . . . . . . . . . . . . . . . . . . . . . .2 Dangers and risk notes. . . . . . . . . . . . . . . . . . . .2 Figures . . . . . .

ALS 20x 256 GB C D EF BA [30] Sensor connectors: A Label sensor B Product sensor C Optional: Rotary encoder D Optional: Roll diameter check E (ALS 20x) Optional: Alternative label sensor F (ALS 256) Optional: Alternative label sensor 31 CONTENTS 3.2 INSERTING LABEL MATERIAL 3.2 3.2.1 Prerequisites – The label dispenser is turned off at the main switch [31A] (switch set to ‘O’). . Check that the safety installations are working properly. . Inspect the machinery for any visible damage. Report any

1.1 Overview....................................................................................................................................... 5 1.1.1 Manufacturer...................................................................................................................... 5 1.1.2 Copyright............................................................................................................................ 5 1.2 Safety...........................................................